yellow 6n2 progress thread :) (KW springs-40mm lower :) )

[dub6n2]

thanks mate I really like the brakes, I am now eager to try them after the running in hehe

as for the strut brace I still have to sort out some noise coming from one of the struts after installing the brace!! sound like metal to metal sound but all the nuts are tight properly so I have no clue where the noise is coming from :/ !!

[benmkiv]

are your new breaks squeaking?
mine are and its driving me nuts!

[dub6n2]

hmm no not at all. When are they squeaking? when pressed or all the time? and did you give them proper running in and so on? what's the brand you are using

[cornishdrummer]

Did you spray tint you side lamps black or buy them already done ?

[dub6n2]

nahh only used spray tint, the same as used on the tail lights and headlamps

[dub6n2]

btw a small update...bought a set of KW 40mm lowering springs will be getting them on tomorow. hopefully it will look a little tighter. I'am also going to have a look at the tie rods because the steering is rattling so much over every bump

[cornishdrummer]

nahh only used spray tint, the same as used on the tail lights and headlamps

How easy was it todo ?

[dub6n2]

very easy. remove the side lamps, clean very well to remove any polish, wax or so and spray. if the spray doesn't hold on the first time wipe off immediately after spraying it and spray again(the spray itself will clean the surface)

[cornishdrummer]

very easy. remove the side lamps, clean very well to remove any polish, wax or so and spray. if the spray doesn't hold on the first time wipe off immediately after spraying it and spray again(the spray itself will clean the surface)

Whats the best make to buy ?

And also do you have any pics of your lights on after you tinted them ?

[dub6n2]

as for the make I am not sure because I do not have the can any more as far as I know and it's bought from a local store here in Malta so I doubt you will find it there. but any ebay one should do mate

I do not have any pictures with the light on but they show clearly enough through the tint. I will take some pictures late on today dw

[cornishdrummer]

as for the make I am not sure because I do not have the can any more as far as I know and it's bought from a local store here in Malta so I doubt you will find it there. but any ebay one should do mate

I do not have any pictures with the light on but they show clearly enough through the tint. I will take some pictures late on today dw

I think I will do the tinting thing, rather then mess about with after market lights which dont fit great and cost loads.

[dub6n2]

as for the make I am not sure because I do not have the can any more as far as I know and it's bought from a local store here in Malta so I doubt you will find it there. but any ebay one should do mate

I do not have any pictures with the light on but they show clearly enough through the tint. I will take some pictures late on today dw

I think I will do the tinting thing, rather then mess about with after market lights which dont fit great and cost loads.

yeah I found it to be the best thing to do, and the result is great if done properly

here is the picture of the blinker on

[cornishdrummer]

The light can be seen clear as any thing then.

[dub6n2]

and some LOWERING at last

on 40mm KW springs



tomorrow I'll take some pictures of the lowered polo

[cornishdrummer]

Your car looks great.