Daz16v's polo gti

[daz16v]

Thanks again for the comments.
Little update,over the weekend i gave the car a good wash and dry,then i polished it with meguairs ultimate compound and sealed it with tech wax.Car came up really good but if forgot to take and before and after pics lol

Ive also changed the oil and replaced the oil filter and sump plug.while i was doing that i have also removed the undertray as there is hardly any of it left because the car was run soooo low before i got it and it was just held on by the tool of gods (zip ties) lol While i was under the car i noticed abit of an oil leak and on further inspection its coming from the rocker cover so its booked in at my local garage for a new gasket.

The horn on the car isnt working checked the fuses and they all seem to be ok,any ideas on what else to check would be helpfull
Thanks for reading
daz

[alexperkins]

Probably the steering wheel push needs reconnecting

As for the rocker cover gasket, that isnt an easy change as the cambelt has to be removed in order to take the cover off due to the cam design.

[daz16v]

cheers mate,il check those connections when i get chance.

when my car was in to have the rocker cover resealed they noticed that the cambelt is pretty worn so now it is booked in for tuesday to have the rocker cover resealed,and new cambelt and tensioners.Just to be safe im gonna use my dads car till then.
Ive also taken the headunit,sub and amp out of my old golf,so will be fitting these into the polo pretty soon.

[bradley1983]

Loving the rims mate.

Doing my badge carbon insert gloss black Vw badge. Yours looks quality.

Remember........reds go faster! Fact!!!

[daz16v]

Loving the rims mate.

Doing my badge carbon insert gloss black Vw badge. Yours looks quality.

Remember........reds go faster! Fact!!!

Cheers mate,the rims were a major factor in me buying the car lol
and red ones do go faster lmao

[bradley1983]

How easy does the rear badge split? Doing mine tomorrow.

[daz16v]

How easy does the rear badge split? Doing mine tomorrow.

its pretty easy mate,just cut the six circular bits off the back of the badge and it shoild seperate pretty easily
Just done my front badge to match

[Verity]

Badge looks awesome Very good job!

[Godderz23]

Looks nice mate. Anything else going to get the carbon treatment?

[daz16v]

Badge looks awesome Very good job!

Cheers mate

Looks nice mate. Anything else going to get the carbon treatment?

Thinking of doing a few small parts of the interior,,dont want to go overkill on it tho

[6N2 GTI 00]

Nice tidy job on the badge mate

[daz16v]

Nice tidy job on the badge mate

Thanks mate,think i need to invest in a decent camera tho,iphone pics arent up to much lol

[daz16v]

Had a busy saturday ,firsy of all i gave the calipers a lick of paint as they were looking abit sortry for them selves
before

After


Then i put the kenwood headunit out of my golf in

and the usb through to the pockt by the steering wheel

Then i set about putting my sub and amp in.the amp is mounted on the back of the box

Its not the best looking install but i need to be able to remove it quickly so i can fit my bmx in,so i bought a vibe fast plug which lets you split the power and remote leads easily so now all i have to do is unplug the two rca's and the fast plug and lift it out!
Heres a pic of the vibe plug


After that i fitted a new areial gasket i got off ebay,just put it in hot water to make it more plyable then streched it over to save dropping the headling
before

after


Thats it for now i think,just looking forward till tuesday when the cambelts done and i can go for a drive in it lol

[Verity]

Nice update!! Calipers and ariel base look soo much better. The little things make such a difference

[daz16v]

Nice update!! Calipers and ariel base look soo much better. The little things make such a difference

thanks,i totally agree about the little things!i noticed on your build thread that your car has a custom awesome gti remap,just wondering how much it cost as they are not far from me and its something ive been thinking about getting done,cheers again!