I like the fogs. I'm now intrested in getting some.
Car looks nice and clean.
New 6N2 owner - 1.4 16v SE
-
bradley1983
- Gold Member
- Posts: 619
- Joined: Mon May 10, 2010 7:03 pm
-
f6had
- Bronze Member
- Posts: 186
- Joined: Wed Mar 31, 2010 8:06 pm
- Location: Halifax, West Yorkshire
- Contact:
Re: New 6N2 owner - 1.4 16v SE
Thanks guys, just H7 LED's off ebay. straight fit.
-
f6had
- Bronze Member
- Posts: 186
- Joined: Wed Mar 31, 2010 8:06 pm
- Location: Halifax, West Yorkshire
- Contact:
Re: New 6N2 owner - 1.4 16v SE
Couple of cheeky ones from this weekend - just finished tuning that 58 reg beemer and decided to give both a wash (sorry none of the Polo in this one)




-
f6had
- Bronze Member
- Posts: 186
- Joined: Wed Mar 31, 2010 8:06 pm
- Location: Halifax, West Yorkshire
- Contact:
Re: New 6N2 owner - 1.4 16v SE
Quick update and just for a bit of fun, we put the Polo on our new Dynocom 5000 rollers.. Completely stock AHW (75bhp, standard panel filter, ignition, exhaust etc). The only thing it is running is one of our ECU remaps (www.premiertuning.com for info)
Car has 125k miles and runs on V Power Petrol only. I was expecting it to be down on power due to the mileage, but it surprised me at almost 83bhp
The 8bhp gain we quote is pretty achievable.
Drop me a line on [email protected] if you want further info on the services we provide.






Ooh and 340lbft anyone



Car has 125k miles and runs on V Power Petrol only. I was expecting it to be down on power due to the mileage, but it surprised me at almost 83bhp
Drop me a line on [email protected] if you want further info on the services we provide.






Ooh and 340lbft anyone



New 6N2 owner - 1.4 16v SE
Pretty sure that Dyno print out says max power 74.9bhp and 83 ib of torque? :s
- 6N2 GTI 00
- Bling Bling Diamond Member
- Posts: 4143
- Joined: Mon Dec 08, 2008 9:20 am
- Location: North Wales, Denbighshire - Drives 255bhp EP3 Type R!
Re: New 6N2 owner - 1.4 16v SE
Yeah must admit it does look like 74.9bhpbenmkiv wrote:Pretty sure that Dyno print out says max power 74.9bhp and 83 ib of torque? :s
-
f6had
- Bronze Member
- Posts: 186
- Joined: Wed Mar 31, 2010 8:06 pm
- Location: Halifax, West Yorkshire
- Contact:
Re: New 6N2 owner - 1.4 16v SE
Engine HP 82.4bhp - check again 
74bhp was at the roller (wheels)
74bhp was at the roller (wheels)
- 6N2 GTI 00
- Bling Bling Diamond Member
- Posts: 4143
- Joined: Mon Dec 08, 2008 9:20 am
- Location: North Wales, Denbighshire - Drives 255bhp EP3 Type R!
Re: New 6N2 owner - 1.4 16v SE
Ahrite coolf6had wrote:Engine HP 82.4bhp - check again
74bhp was at the roller (wheels)
-
f6had
- Bronze Member
- Posts: 186
- Joined: Wed Mar 31, 2010 8:06 pm
- Location: Halifax, West Yorkshire
- Contact:
