BMC CDA 6n2 GTi can't find 1 :-/
BMC CDA 6n2 GTi can't find 1 :-/
I've been looking for a BMC CDA for my GTi but I can't find 1 anywhere!
All I can seem to find is 1.4 16v not 1.6 16v GTi
Is that what all you lot been putting on? Is there no difference in the diameter of the holes on the CDA?
All I can seem to find is 1.4 16v not 1.6 16v GTi
Is that what all you lot been putting on? Is there no difference in the diameter of the holes on the CDA?
Re: BMC CDA 6n2 GTi can't find 1 :-/
I bought one of ebay, not a BMC but one made by ash, it was just the carbon box and i bought some hose to connect it, as far as i can remember the throttle body is about 65mm (correct me if im wrong) ... Dont know if thats any help.... Not sure if the 1.4 is same size but you can buy different size hoses
BMC CDA 6n2 GTi can't find 1 :-/
The only difference between these two kits is the size reducer they send. The 1.4 only has a 50mm throttle body I thinks where the gti is slightliy bigger you can but that kit and then buy your own reducer / I think it comes with the right one anyway
- Endi_GTI
- Gold Member
- Posts: 940
- Joined: Fri Oct 22, 2010 8:00 pm
- Location: Plymouth, UK, Drives Polo 6N2 GTI
Re: BMC CDA 6n2 GTi can't find 1 :-/
Think this is the best place and cheapest buddy:
http://www.kamracing.co.uk/volkswagen/v ... v-gti.html
http://www.kamracing.co.uk/volkswagen/v ... v-gti.html
Last edited by Endi_GTI on Fri Nov 25, 2011 8:41 am, edited 2 times in total.
BMC CDA 6n2 GTi can't find 1 :-/
That's a good price!
- 6N2 GTI 00
- Bling Bling Diamond Member
- Posts: 4143
- Joined: Mon Dec 08, 2008 9:20 am
- Location: North Wales, Denbighshire - Drives 255bhp EP3 Type R!
Re: BMC CDA 6n2 GTi can't find 1 :-/
Deffo the best place to get them fromEndi_GTI wrote:Think the is the best place and cheapest buddy:
http://www.kamracing.co.uk/volkswagen/v ... v-gti.html
Re: BMC CDA 6n2 GTi can't find 1 :-/
Sweet! Thanks all of you! I'll be ordering that 2moro once I've been to the bank :-p
Cheapest I could find last nite was this...
http://www.dcperformance.co.uk/cheap/82 ... 16-40.html
For the 1.4 16v and don't think that included postage either.
Cheapest I could find last nite was this...
http://www.dcperformance.co.uk/cheap/82 ... 16-40.html
For the 1.4 16v and don't think that included postage either.
Re: BMC CDA 6n2 GTi can't find 1 :-/
Endi_GTI wrote:Think this is the best place and cheapest buddy:
http://www.kamracing.co.uk/volkswagen/v ... v-gti.html
Which 90 degree bend did to lot get? 70mm silicone? Or the cheaper rubber??
I want silicone but want red instead of blue.
- Trottagti
- Bling Bling Diamond Member
- Posts: 2050
- Joined: Mon Feb 04, 2008 7:58 pm
- Location: Chelmsford, Essex.
Re: BMC CDA 6n2 GTi can't find 1 :-/
I would highly recommend the k&n typhoon kit mate, no heat sock and actually gives you gains, pricey but well worth the money..... Looks tidy in the bay aswell insted of crappy clamps the bmc comes with : /
Re: BMC CDA 6n2 GTi can't find 1 :-/
How much we talkin here? Cos if it's not that much more for better gains then it's worth it like you saidTrottagti wrote:I would highly recommend the k&n typhoon kit mate, no heat sock and actually gives you gains, pricey but well worth the money..... Looks tidy in the bay aswell insted of crappy clamps the bmc comes with : /
- Trottagti
- Bling Bling Diamond Member
- Posts: 2050
- Joined: Mon Feb 04, 2008 7:58 pm
- Location: Chelmsford, Essex.
Re: BMC CDA 6n2 GTi can't find 1 :-/
There about £299 but well worth it, take a look on my thread its on there....
Re: BMC CDA 6n2 GTi can't find 1 :-/
I seen it last note mate looks mint! Still not finished goin thru your thread lolTrottagti wrote:There about £299 but well worth it, take a look on my thread its on there....
I've managed to find 1 on eBay wrinkle Red for £230 posted or polished for £209 posted.
I would order it but just ordered loads from VW so it can wait till nxt week now.
- Trottagti
- Bling Bling Diamond Member
- Posts: 2050
- Joined: Mon Feb 04, 2008 7:58 pm
- Location: Chelmsford, Essex.
Re: BMC CDA 6n2 GTi can't find 1 :-/
Ha. Yeah it's abit lengthy mate but a good read i reckon lol!
That's a smashing price that. Red would look better than polished I think, could do the red cap mod and spray them to match you know.. No polishing all the time either...!
Only thing about the kit that's not that good is the jubilee clamps, I updated mine to boost clamps but that's just me being anal. Lol.
That's a smashing price that. Red would look better than polished I think, could do the red cap mod and spray them to match you know.. No polishing all the time either...!
Only thing about the kit that's not that good is the jubilee clamps, I updated mine to boost clamps but that's just me being anal. Lol.
Re: BMC CDA 6n2 GTi can't find 1 :-/
Yeh I was thinking of the red cos it goes with spark plug leads, top of the engine and the strut brace I've got so extra £20 for a nice looking typhoon kit is worth it I think. And like you said do red caps aswell.Trottagti wrote:Ha. Yeah it's abit lengthy mate but a good read i reckon lol!
That's a smashing price that. Red would look better than polished I think, could do the red cap mod and spray them to match you know.. No polishing all the time either...!
Only thing about the kit that's not that good is the jubilee clamps, I updated mine to boost clamps but that's just me being anal. Lol.
I've been so close to ordering it 2day!! Just means a week without money :-p
Re: BMC CDA 6n2 GTi can't find 1 :-/
All bought and paid for and cannot wait for it to turn up 
http://www.ebay.co.uk/itm/290581180033? ... 021wt_1002
Think it's a reasonable price?
http://www.ebay.co.uk/itm/290581180033? ... 021wt_1002
Think it's a reasonable price?



