Darrens GTi

[darrenpolo]

Low version H&R Springs fitted, 35mm front, 45mm rear



Lamin-x foglights

[Boyracer_2011]

Very nice mate

[NeilMcConville]

Looking well

[Vissa]

Do those exist? I only see 25 front / 40 rear and 35 front / 55 rear for the 6R GTI on the H&R website?

Anyway it's looking good!

[Shady Pioneer]

That's looking smart of took mate. Nice!

[DubbisH]

Hey bud.....do you have a link or info on that laminx you used? I want to do this myself but some of the stuff is either to dark or too light....your looks about right there. Any info would be great cheers pal.

*DubbisH*

[darrenpolo]

Thanks for the comments.

The springs are the lower version of the two available, because the gti i factory lowered it doesn't count as much of a drop.

As for the lamin x, just go on there website and click shop, you'll need 2x 12x4 sheets.

Works out about £17 delivered.

And for god sake don't buy the cheap £3.99 stuff off eBay

[DubbisH]

Thanks for the comments.

The springs are the lower version of the two available, because the gti i factory lowered it doesn't count as much of a drop.

As for the lamin x, just go on there website and click shop, you'll need 2x 12x4 sheets.

Works out about £17 delivered.

And for god sake don't buy the cheap £3.99 stuff off eBay

Noted

Thanks mate.

*DubbisH*

[tt509]

[darrenpolo]

Installed wheel spacers to the rear today

[Vissa]

What's the spacer thickness? Looks pretty thick!

[darrenpolo]

Only 20'mm each side,

I'm getting 10'mm each side for the front.

:>)

[NeilMcConville]

What make did you go for? Looking well

[nodoze]

I'm sorry to inform you, but with those 35mm springs on the front with a 10mm spacer you are going to be rubbing big time on cornering.

[darrenpolo]

I've put the ten mm on now and no rubbing?!