As the title says,and it stopped working,looking at the Haynes manual was Bobbins....remove the 9N front grill and bumper-totally different to the 9N3,so after taking out all the torx screws I could see,and then putting them back in again removed the front of the inner wheel arch cover and a bit of the front undertray...I can see the pump
![Very Happy :D](./images/smilies/icon_biggrin.gif)
and it works O.K.
![Sad :(](./images/smilies/icon_sad.gif)
using my beloved for what she does best,playing with the knobs, tracing the squirting to near the ABS pump unit....what a cow..just behind,under the wiring loom is the pipe which feeds the rear screen....AND IT'S GOT A JOINT IN IT...don't get too excited there's no Marijuana round,just an in-line push fit connector which had come off....it's not easy to get your fists in there but with a little patience can be done...
John
![Wink :wink:](./images/smilies/icon_wink.gif)