Cross Polo 6R Upgrading to BCM Max with Auto light switch

Chat about your 6R/6C model Polos here!
Post Reply
MaDwArLoCk
Bronze Member
Posts: 165
Joined: Sun Jul 02, 2017 10:57 am
Drives: Cross Polo 2010 TSI
Location: Netherlands

Re: Cross Polo 6R Upgrading to BCM Max with Auto light switch

Post by MaDwArLoCk »

Hey Ciclo!
It's a MIRACLE!!!
When i open my car after work, was nice to see that LH working and when i start moving after few seconds BOOM and high beam emblem appears on IC :D :D :D
And everything is working now! Fog lights, high beam and dimmer!

Happy as never! :D

This BCM was from T5
Top
User avatar
ciclo
Bling Bling Diamond Member
Posts: 8837
Joined: Sun Feb 24, 2013 10:20 am
Drives: 6R'13/G7.5'19
Location: Earth ♥, Spain.
Contact:
Contact ciclo

Re: Cross Polo 6R Upgrading to BCM Max with Auto light switch

Post by ciclo »

Excellent! :D
At last!... your BCM and your F* VCDS agreed on something. :lol:

Magic (or miracles) are jokes that others do not understand :lol:, post a full autoscan to share with others ...in the name of love.
Top
MaDwArLoCk
Bronze Member
Posts: 165
Joined: Sun Jul 02, 2017 10:57 am
Drives: Cross Polo 2010 TSI
Location: Netherlands

Re: Cross Polo 6R Upgrading to BCM Max with Auto light switch

Post by MaDwArLoCk »

Again not working! I suppose now High beam and Rear fog light works only at night! :D

Auto scan with new fault: 03789 - Terminal 75 Limp Mode Active - Limp mode?

Code: Select all

Tuesday,22,August,2017,09:34:58:39744
VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x86
VCDS Version: 17.1.3.0
Data version: 20170220 DS267.3
www.Ross-Tech.com


VIN: WVWZZZ6RZAU000000   License Plate: 


Chassis Type: 6R (6N0)
Scan: 01 03 04 08 09 10 15 17 19 25 37 44 56 77 0B

VIN: WVWZZZ6RZAU000000   Mileage: 157000km-97555miles

01-Engine -- Status: OK 0000
03-ABS Brakes -- Status: OK 0000
04-Steering Angle -- Status: OK 0000
08-Auto HVAC -- Status: Malfunction 0010
09-Cent. Elect. -- Status: Malfunction 0010
10-Park/Steer Assist -- Status: OK 0000
15-Airbags -- Status: OK 0000
17-Instruments -- Status: OK 0000
19-CAN Gateway -- Status: OK 0000
25-Immobilizer -- Status: OK 0000
37-Navigation -- Status: OK 0000
44-Steering Assist -- Status: OK 0000
56-Radio -- Status: OK 0000
61-Battery Regul. -- Status: Malfunction 0010
77-Telephone -- Status: OK 0000
 
-------------------------------------------------------------------------------
Address 01: Engine (J623-CBZB)       Labels: 03F-906-070-CBZ.clb
   Part No SW: 03F 906 070 D    HW: 03F 906 070 D
   Component: SIMOS10.20H02 9851  
   Revision: --------    Serial number:               
   Coding: 001900D6202400080000
   Shop #: WSC 31414 790 50316
   ASAM Dataset: EV_ECM12TFS02103F906070D 003015
   ROD: EV_ECM12TFS_003_VW25.rod
   VCID: 234234CE2A4EB859D4-8076

No fault code found.
Readiness: 0000 0000

-------------------------------------------------------------------------------
Address 03: ABS Brakes (J104)       Labels: 6R0-907-37x-ESP82.clb
   Part No SW: 6R0 907 379 AF    HW: 6R0 907 379 AF
   Component: ESP8.2i front H05 0005  
   Revision: --------    
   Coding: 210228E3227300BA842C14E844D600401300
   Shop #: WSC 31414 790 31414
   VCID: 020C514A99945151FF-8056

No fault code found.

-------------------------------------------------------------------------------
Address 08: Auto HVAC (J255)       Labels: 6R0-907-044.clb
   Part No SW: 6R0 907 044 H    HW: 6R0 907 044 H
   Component: Climatronic   H11 0711  
   Revision: V0000000    
   VCID: 3878F3A28BC8CB8111-806C

2 Faults Found:
00457 - Control Module for Network (J519) 
            004 - No Signal/Communication
             Freeze Frame:
                    Fault Status: 01100100
                    Fault Priority: 6
                    Fault Frequency: 1
                    Reset counter: 14
                    Mileage: 156965 km
                    Time Indication: 0
                    Date: 2012.01.12
                    Time: 00:40:17

00457 - Control Module for Network (J519) 
            013 - Check DTC Memory - Intermittent
             Freeze Frame:
                    Fault Status: 00101101
                    Fault Priority: 6
                    Fault Frequency: 3
                    Reset counter: 52
                    Mileage: 156965 km
                    Time Indication: 0
                    Date: 2012.01.12
                    Time: 00:40:17


-------------------------------------------------------------------------------
Address 09: Cent. Elect. (J519)       Labels: 7H0-937-08x-09.clb
   Part No SW: 7H0 937 090 B    HW: 7H0 937 090 
   Component: BCM PQ25 Max4 H74 0712  
   Revision: B9074001    Serial number: 0571 017140713
   Coding: 24B02BBF48E3240093300FB02CEB1ED011C0610E60042001200000010000
   Shop #: WSC 02756 790 00000
   VCID: 2D56D2F6748A7E2972-8078

   Subsystem 1 - Part No: 1K0 955 559 AH  Labels: 1K0-955-559-AG.CLB
   Component: RLS 210310 05  54  0403 
   Coding: 06302D

   Subsystem 2 - Part No SW: 6R0 959 801 R    HW: 6R0 959 801 R  Labels: 6R0-959-801.CLB
   Component: J386__TSG_FT  006 0903 
   Serial number: KU0-KU028.04.1013935
   Coding: 18BC30

   Subsystem 3 - Part No SW: 6R0 959 802 T    HW: 6R0 959 802 T  Labels: 6R0-959-802.CLB
   Component: J387__TSG_BT  006 0902 
   Serial number: KU0-KU030.04.1010613
   Coding: 08BC30

   Subsystem 4 - Part No: 1K8 951 171 A
   Component: DWA-Sensor 00  001 0103 
   Coding: 000000

   Subsystem 5 - Part No: 1K8 951 605 A
   Component: LIN BACKUP HO  H11 9004 
   Coding: 000000

   Subsystem 6 - Part No: 1K8 951 171 A
   Component: DWA-Sensor 00  001 0103 
   Coding: 000000

   Subsystem 7 - Part No SW: 6R0 959 811 F    HW: 6R0 959 811 F
   Component: J388__TSG_HL  006 0902 
   Serial number: KU0-KU026.04.1016866
   Coding: 08BC32

   Subsystem 8 - Part No SW: 6R0 959 812 F    HW: 6R0 959 812 F
   Component: J389__TSG_HR  006 0902 
   Serial number: KU0-KU020.04.1013618
   Coding: 08BC32

1 Fault Found:
03789 - Terminal 75 Limp Mode Active 
            000 -  - 
             Freeze Frame:
                    Fault Status: 01100000
                    Fault Priority: 3
                    Fault Frequency: 1
                    Reset counter: 13
                    Mileage: 156965 km
                    Time Indication: 0
                    Date: 2012.01.12
                    Time: 16:03:35


-------------------------------------------------------------------------------
Address 10: Park/Steer Assist (J446)       Labels: 6R0-919-475.clb
   Part No SW: 6R0 919 475 A    HW: 7E0 919 475 
   Component: PARKHILFE 4K  H10 0011  
   Revision: --------    Serial number: 64531012301615
   Coding: 100003
   Shop #: WSC 31414 790 50316
   ASAM Dataset: EV_VW250ParikAssis2 S01008
   ROD: N/A
   VCID: 3C70EFB2B7F0E7A1F5-8068

No ASAM data for: "EV_VW250ParikAssis2" (VW25) 
No fault code found.

-------------------------------------------------------------------------------
Address 15: Airbags (J234)       Labels: 5K0-959-655.clb
   Part No SW: 6R0 959 655 K    HW: 6R0 959 655 K
   Component: VW10Airbag00K H08 0020  
   Revision: --------    Serial number: 003GX002F4VI
   Coding: 00304B
   Shop #: WSC 31414 790 31414
   ASAM Dataset: EV_AirbaVW10BPAWV250 A01001
   ROD: N/A
   VCID: 4A9CB96AED24491177-801E

   Subsystem 1 - Serial number: 3572SRB40000B53459C7

   Subsystem 2 - Serial number: 3582SRB40000B520C0C1

   Subsystem 3 - Serial number: 3515RRB405D6QGG0HO90

   Subsystem 4 - Serial number: 3525RRB405B6SD5OFPMN

No ASAM data for: "EV_AirbaVW10BPAWV250" (VW25) 
No fault code found.

-------------------------------------------------------------------------------
Address 17: Instruments (J285)       Labels: 5K0-920-xxx-17.clb
   Part No SW: 6R0 920 860 D    HW: 6R0 920 860 D
   Component: KOMBI         H03 0207  
   Serial number: 00000000000000
   Coding: 140800
   Shop #: WSC 31414 790 50316
   ASAM Dataset: EV_Kombi_UDS_VDD_RM09 A04052
   ROD: EV_Kombi_UDS_VDD_RM09_A04_VW25.rod
   VCID: 3566FA9694DA36E90A-8060

No fault code found.

-------------------------------------------------------------------------------
Address 19: CAN Gateway (J533)       Labels: 6N0-909-901-6R.clb
   Part No SW: 6N0 909 901     HW: 7H0 937 090 
   Component: GW-K-CAN TP20 H74 0712  
   Revision: B9074001    
   Coding: 002200
   Shop #: WSC 02756 790 00000
   VCID: 70E80B82A33853C119-8024

No fault code found.

-------------------------------------------------------------------------------
Address 25: Immobilizer (J334)       Labels: 5K0-920-xxx-25.clb
   Part No SW: 5K0 953 234     HW: 5K0 953 234 
   Component: IMMO          H03 0207  
   Serial number:               
   Coding: 000000
   Shop #: WSC 00000 000 00000
   ASAM Dataset: EV_ImmoU_DS_VDD_RM09 A03006
   ROD: N/A
   VCID: 6ADC19EA8DE4A91157-803E

No ASAM data for: "EV_ImmoU_DS_VDD_RM09" (VW36 *) 
No fault code found.

-------------------------------------------------------------------------------
Address 37: Navigation (J0506)       Labels: 1T0-035-680.clb
   Part No SW: 1T0 035 680 R    HW: 1T0 035 680 R
   Component: RNS-MID       H21 6270  
   Revision: AB001001    Serial number: VWZ6Z7N8319084
   Coding: 040104020100002C0001
   Shop #: WSC 01357 011 00200
   VCID: 3D76E2B6A4EAEEA9C2-8068

   Subsystem 1 - Part No: 1T0 919 859 B
   Component: EU West V14  8477 

No fault code found.

-------------------------------------------------------------------------------
Address 44: Steering Assist        Labels: 6Q0-423-156.clb
   Part No: 6R0 423 156 B
   Component: LenkhilfeTRW        V277  
   Coding: 11230
   Shop #: WSC 31414  
   VCID: 2F6AC8FEEA860C3940-807A

No fault code found.

-------------------------------------------------------------------------------
Address 56: Radio (J0506)       Labels: 1T0-035-680.clb
   Part No SW: 1T0 035 680 R    HW: 1T0 035 680 R
   Component: RNS-MID       H21 6270  
   Revision: AB001001    Serial number: VWZ6Z7N8319084
   Coding: 040104020100002C0001
   Shop #: WSC 01357 011 00200
   VCID: 3D76E2B6A4EAEEA9C2-8068

   Subsystem 1 - Part No: 1T0 919 859 B
   Component: EU West V14  8477 

No fault code found.

-------------------------------------------------------------------------------
Address 77: Telephone (J412)       Labels: 7P6-035-730.clb
   Part No SW: 7P6 035 730 D    HW: 7P6 035 730 D
   Component: TELEFON       H05 0440  
   Revision: 1B001001    Serial number: 00007668399469
   Coding: 0A00000000010110
   Shop #: WSC 05314 115 12345
   ASAM Dataset: UHVNA A01007
   ROD: UHVNA.rod
   VCID: 3362C48E9AAE28D924-8066

1 Fault Found:
0022 - Radio 
          U1066 00 [000] - No Communication
          Intermittent - Not Confirmed - Tested Since Memory Clear


End-------------------------(Elapsed Time: 03:45)--------------------------
Last edited by MaDwArLoCk on Sun Feb 04, 2018 8:38 am, edited 1 time in total.
Top
User avatar
ciclo
Bling Bling Diamond Member
Posts: 8837
Joined: Sun Feb 24, 2013 10:20 am
Drives: 6R'13/G7.5'19
Location: Earth ♥, Spain.
Contact:
Contact ciclo

Re: Cross Polo 6R Upgrading to BCM Max with Auto light switch

Post by ciclo »

Image
Hmm... :lol:
Image

Verify that 370 relay (J59 - X-contact relief relay) is properly installed. Push it.
All faults makes me think that this could be the problem.

If it is not the problem check the ignition switch connector T6. (T6/6)
Top
MaDwArLoCk
Bronze Member
Posts: 165
Joined: Sun Jul 02, 2017 10:57 am
Drives: Cross Polo 2010 TSI
Location: Netherlands

Re: Cross Polo 6R Upgrading to BCM Max with Auto light switch

Post by MaDwArLoCk »

ciclo wrote: Tue Aug 22, 2017 10:27 am
Verify that 370 relay (J59 - X-contact relief relay) is properly installed. Push it.
All faults makes me think that this could be the problem.
Took it out and put it back! Not Helps


Just received my Xenon headlights:
Image
Last edited by MaDwArLoCk on Sun Feb 04, 2018 8:39 am, edited 1 time in total.
Top
User avatar
iichel
Bling Bling Diamond Member
Posts: 6685
Joined: Fri Nov 14, 2014 2:14 pm
Drives: Polo 6R 2.0 TDI, Passat B8 2.0 TSI
Location: http://mypassat.nl/

Re: Cross Polo 6R Upgrading to BCM Max with Auto light switch

Post by iichel »

Sometimes terminal 75 is directly activated with terminal 15, or the other way around. But the wiring diagram is clear, T6/6 operates the x-relief relay.
Top
MaDwArLoCk
Bronze Member
Posts: 165
Joined: Sun Jul 02, 2017 10:57 am
Drives: Cross Polo 2010 TSI
Location: Netherlands

Re: Cross Polo 6R Upgrading to BCM Max with Auto light switch

Post by MaDwArLoCk »

Ignition switch connector?


i have checked Ignition switch connector - looks ok.
i tried to move/shake it - does no t help!
probably it's necessary to remove steering wheel to unplug this connector...
Last edited by MaDwArLoCk on Sun Feb 04, 2018 8:39 am, edited 1 time in total.
Top
User avatar
ciclo
Bling Bling Diamond Member
Posts: 8837
Joined: Sun Feb 24, 2013 10:20 am
Drives: 6R'13/G7.5'19
Location: Earth ♥, Spain.
Contact:
Contact ciclo

Re: Cross Polo 6R Upgrading to BCM Max with Auto light switch

Post by ciclo »

Image

Image

Yesterday it worked, not today ... some connection / splicing / connector might not be OK ...
Top
User avatar
ciclo
Bling Bling Diamond Member
Posts: 8837
Joined: Sun Feb 24, 2013 10:20 am
Drives: 6R'13/G7.5'19
Location: Earth ♥, Spain.
Contact:
Contact ciclo

Re: Cross Polo 6R Upgrading to BCM Max with Auto light switch

Post by ciclo »

Do not install the bixenon headlights until this problem is solved.
Top
MaDwArLoCk
Bronze Member
Posts: 165
Joined: Sun Jul 02, 2017 10:57 am
Drives: Cross Polo 2010 TSI
Location: Netherlands

Re: Cross Polo 6R Upgrading to BCM Max with Auto light switch

Post by MaDwArLoCk »

ciclo wrote: Tue Aug 22, 2017 12:34 pm Do not install the bixenon headlights until this problem is solved.
OK.
ciclo wrote: Tue Aug 22, 2017 12:34 pm
Yesterday it worked, not today ... some connection / splicing / connector might not be OK ...
Tomorrow I will take out steering wheel and check this connector!
Top
MaDwArLoCk
Bronze Member
Posts: 165
Joined: Sun Jul 02, 2017 10:57 am
Drives: Cross Polo 2010 TSI
Location: Netherlands

Re: Cross Polo 6R Upgrading to BCM Max with Auto light switch

Post by MaDwArLoCk »

ciclo wrote: Tue Aug 22, 2017 12:23 pm
Image
Does this diagram means that I have to use new cable from SB40 to J126?
I used existing connections from Climatic!
Top
MaDwArLoCk
Bronze Member
Posts: 165
Joined: Sun Jul 02, 2017 10:57 am
Drives: Cross Polo 2010 TSI
Location: Netherlands

Re: Cross Polo 6R Upgrading to BCM Max with Auto light switch

Post by MaDwArLoCk »

:)
Last edited by MaDwArLoCk on Sun Feb 04, 2018 8:40 am, edited 1 time in total.
Top
User avatar
iichel
Bling Bling Diamond Member
Posts: 6685
Joined: Fri Nov 14, 2014 2:14 pm
Drives: Polo 6R 2.0 TDI, Passat B8 2.0 TSI
Location: http://mypassat.nl/

Re: Cross Polo 6R Upgrading to BCM Max with Auto light switch

Post by iichel »

No, it's definitely wrong to isolate. It's connected to the N280 air conditioning pressure regulating valve.
N280 connects to T16i/4 (see diagram 26/5)!

Re-connect it..

Image
Top
MaDwArLoCk
Bronze Member
Posts: 165
Joined: Sun Jul 02, 2017 10:57 am
Drives: Cross Polo 2010 TSI
Location: Netherlands

Re: Cross Polo 6R Upgrading to BCM Max with Auto light switch

Post by MaDwArLoCk »

iichel wrote: Tue Aug 22, 2017 2:55 pm
Re-connect it..
Thanks iichel! I will! :)


ciclo wrote: Tue Aug 22, 2017 12:23 pm
Image
When you retrofit Climatronic, how did you realize power for ventilator motor?
Have you used an existing connection or made a new cable from SB40?
Top
User avatar
iichel
Bling Bling Diamond Member
Posts: 6685
Joined: Fri Nov 14, 2014 2:14 pm
Drives: Polo 6R 2.0 TDI, Passat B8 2.0 TSI
Location: http://mypassat.nl/

Re: Cross Polo 6R Upgrading to BCM Max with Auto light switch

Post by iichel »

New wire to SB40. Isolate old wire.
Top
Post Reply

Return to “MK8 and MK9 (6R/6C) Polo (inc GTI) - Years 2009-2017”