Vento ~ Polo Sedan 1.5 Tdi RHD
-
- Bronze Member
- Posts: 105
- Joined: Sat Oct 27, 2018 5:55 am
- Drives: Vento 1.5 TDI MT and Polo 6R 1.2 Tsi Dsg
- Location: Coimbatore, India
Vento ~ Polo Sedan 1.5 Tdi RHD
Dear Friends,
I'm opening a new topic seeking a help from you guys to upgrade the BCM and other features associated.
I'm from India owning Vento (Polo sedan) 2017 model comes with a BCM 6R0 937 085 R and I would like to update the BCM and few other options. Can you help me sourcing the BCM and other parts. As said by multiple users from India, it is impossible to get the parts here. So expecting your help to source the required parts.
1. BCM Max
2. No headlight upgrade as of now. I will alive with H7 headlights for some more time
3. Auto light switch (my car has Rain sensor with dimming mirror already)
4. CH, LH
5. Dimming of interior lights along with manual headlight adjuster present
6. Stalk - single side parking
7. DRL sourcing beside fog lights as said here viewtopic.php?f=56&t=69687&start=30#p524168
Thanks in advance,
Sakthi
I'm opening a new topic seeking a help from you guys to upgrade the BCM and other features associated.
I'm from India owning Vento (Polo sedan) 2017 model comes with a BCM 6R0 937 085 R and I would like to update the BCM and few other options. Can you help me sourcing the BCM and other parts. As said by multiple users from India, it is impossible to get the parts here. So expecting your help to source the required parts.
1. BCM Max
2. No headlight upgrade as of now. I will alive with H7 headlights for some more time
3. Auto light switch (my car has Rain sensor with dimming mirror already)
4. CH, LH
5. Dimming of interior lights along with manual headlight adjuster present
6. Stalk - single side parking
7. DRL sourcing beside fog lights as said here viewtopic.php?f=56&t=69687&start=30#p524168
Thanks in advance,
Sakthi
Last edited by sshakthi123 on Sun May 15, 2022 7:10 pm, edited 6 times in total.
-
- Bronze Member
- Posts: 105
- Joined: Sat Oct 27, 2018 5:55 am
- Drives: Vento 1.5 TDI MT and Polo 6R 1.2 Tsi Dsg
- Location: Coimbatore, India
Re: BCM Max upgrade in Polo Sedan (Vento in india) manual highline
Hi Ciclo
Can you confirm the required part numbers of BCM, auto light switch, dimmer adjuster switch and a fog lamp with a DRL for Polo sedan or vento.
So I will start procuring it.
Thanks much,
Sakthi
Can you confirm the required part numbers of BCM, auto light switch, dimmer adjuster switch and a fog lamp with a DRL for Polo sedan or vento.
So I will start procuring it.
Thanks much,
Sakthi
- ciclo
- Bling Bling Diamond Member
- Posts: 7842
- Joined: Sun Feb 24, 2013 10:20 am
- Drives: 6R'13/G7.5'19
- Location: Earth ♥, sPAIN, Magiclands (Mordor).
- Contact:
Re: BCM Max upgrade in Polo Sedan (Vento in india) manual highline
Your private message: (I don't answer private messages. Please, make your questions and provide the info from your car in this thread. Thanks)
About...
sshakthi123 wrote:Fri Nov 02, 2018 7:14 am Hi Ciclo
Here are the part numbers I found for the BCM max upgrade for my vento (india version). I'm in touch with firegrafik to procure some of these now and keep it ready and wait for your help to prepare wiring looms.
Can you confirm these are good to procure.
Part - 1 (will do it now)
BCM - 7E0937090D - I heard the BCM version "C" will have a different radio frequency which may not support india version keys. So shall choose "D"
Light switch - 3С8941431А
Dimmer switch - 6RU941333 9B9
And a wiring harness required.
Will plan for future upgrades (list below)
fog lights with DRL - 6R0941061B, 6R0941062B
fog light harness - link here
trunk camera - 6RF980121
I really appreciate your help.
Thanks much,
Sakthi
About...
... this statement is totally incorrect.sshakthi123 wrote:Fri Nov 02, 2018 7:14 am BCM - 7E0937090D - I heard the BCM version "C" will have a different radio frequency which may not support india version keys.
-
- Bronze Member
- Posts: 105
- Joined: Sat Oct 27, 2018 5:55 am
- Drives: Vento 1.5 TDI MT and Polo 6R 1.2 Tsi Dsg
- Location: Coimbatore, India
Re: BCM Max upgrade in Polo Sedan (Vento in india) manual highline
Hi Ciclo,
Please find the pictures from my car.
here is the latest VCDS scan,
Please review and help on the wiring harness required. (I remember you mentioned you cannot do wiring until Jan, I will wait.)
My requirements are,
1. BCM max adaptation (7E0937090D)
2. Auto light with CH/LH
3. Fog light with DRL
4. No headlight mods for now, but the adaptation to support through new BCM is required
5. Dimmer cum headlight adjuster
Thanks in advance.
Thanks,
Sakthi
Please find the pictures from my car.
here is the latest VCDS scan,
Code: Select all
Saturday,24,November,2018,09:08:06:00006
VCDS -- Windows Based VAG/VAS Emulator Running on Windows 8.1 x64
VCDS Version: 18.2.0.3 (x64)
Data version: 20180212 DS287.0
www.Ross-Tech.com
VIN: MEXJ1760XJT075118 License Plate: 8854-24112018
Mileage: 9860km-6126mi Repair Order:
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Chassis Type: 60-VW25 (6RU)
Scan: 01 03 08 09 10 15 17 19 25 44 56
VIN: MEXJ1760XJT075118 Mileage: 9860km-6126miles
01-Engine -- Status: OK 0000
03-ABS Brakes -- Status: OK 0000
08-Auto HVAC -- Status: OK 0000
09-Cent. Elect. -- Status: OK 0000
10-Park/Steer Assist -- Status: OK 0000
15-Airbags -- Status: OK 0000
17-Instruments -- Status: OK 0000
19-CAN Gateway -- Status: OK 0000
25-Immobilizer -- Status: OK 0000
44-Steering Assist -- Status: OK 0000
56-Radio -- Status: OK 0000
-------------------------------------------------------------------------------
Address 01: Engine (J623-CWXC) Labels: None
Part No SW: 03L 906 023 RS HW: 03L 907 425 B
Component: R4 1.5l TDI H33 9977
Revision: --H33--- Serial number:
Coding: 00110116032500080000
Shop #: WSC 00000 000 08192
ASAM Dataset: EV_ECM15TDI02103L906023RS 001002
ROD: EV_ECM15TDI02103L906023QT.rod
VCID: 081F2E22B3333D0450-805C
No fault code found.
Readiness: 0 0 0 0 0
-------------------------------------------------------------------------------
Address 03: ABS Brakes (J104) Labels: None
Part No SW: 6R0 907 379 CA HW: 6R0 907 379 AQ
Component: ABS9.0 front H01 0004
Serial number: --------------
Coding: 60DD2F63212A04C50615F46A845920020000
Shop #: WSC 00000 000 08192
ASAM Dataset: EV_Brake1ABS90BOSCH 003017
ROD: EV_Brake1ABS90BOSCH_VW25.rod
VCID: 7F0DB5FEE6FD7ABC61-802A
No fault code found.
-------------------------------------------------------------------------------
Address 08: Auto HVAC (J255) Labels: 6R0-907-044.clb
Part No SW: 6R0 907 044 Q HW: 6R0 907 044 Q
Component: Climatronic H12 0615
Revision: V0000000
VCID: 4189F306D889CC4C57-8014
No fault code found.
-------------------------------------------------------------------------------
Address 09: Cent. Elect. (J519) Labels:. 6R0-937-08x-09.clb
Part No SW: 6RU 937 086 R HW: 6RU 937 086 R
Component: BCM IM M+4 H42 0452
Revision: BY042001 Serial number: 6700 250170061
Coding: 3A904BFF48A10000013800006F2B16900080600F608E2140220000000A00
Shop #: WSC 124697 483 00190
VCID: 70EF66C2A3A315C4E8-8024
Subsystem 1 - Part No: 5K7 955 559 C Labels: 5K7-955-559.CLB
Component: RLS 290617 04 42 0106
Coding: 036800
Subsystem 2 - Part No SW: 6R0 959 802 EF HW: 6R0 959 802 EF Labels: 6R0-959-802.CLB
Component: J386__TSG_FT 023 2521
Serial number: 13202848170704050535
Coding: 000000
Subsystem 3 - Part No SW: 6R0 959 801 ED HW: 6R0 959 801 ED Labels: 6R0-959-801.CLB
Component: J387__TSG_BT 023 2521
Serial number: 13102849170705002249
Coding: 000000
Subsystem 4 - Part No SW: 6C0 959 442 HW: 6C0 959 442
Component: E221__MFL-TAT H06 0023
Serial number: 1811713320101504AB1B
Coding: 240000
Subsystem 5 - Part No SW: 6R0 959 811 S HW: 6R0 959 811 S
Component: J388__TSG_HL 022 1522
Serial number: 13102728170704212031
Coding: 000000
Subsystem 6 - Part No SW: 6R0 959 812 S HW: 6R0 959 812 S
Component: J389__TSG_HR 022 1522
Serial number: 13102729170630002341
Coding: 000000
No fault code found.
-------------------------------------------------------------------------------
Address 10: Park/Steer Assist (J446) Labels:| 6R0-919-475.clb
Part No SW: 6R0 919 475 C HW: 7E0 919 475
Component: PARKHILFE 4K H11 0013
Revision: -------- Serial number: 47331323402335
Coding: 108001
Shop #: WSC 01234 785 00200
ASAM Dataset: EV_VW250ParkiAssis2 S01008
ROD: EV_VW250ParkiAssis2.rod
VCID: 3E7388FAA177B3B42A-806A
No fault code found.
-------------------------------------------------------------------------------
Address 15: Airbags (J234) Labels:| 5K0-959-655.clb
Part No SW: 6R0 959 655 J HW: 6R0 959 655 J
Component: VW10AirbagU06 H10 0020
Revision: -------- Serial number: 003GW01BGFS-
Coding: 003036
Shop #: WSC 00000 000 08192
ASAM Dataset: EV_AirbaVW10BPAVW250 A01001
ROD: EV_AirbaVW10BPAVW250.rod
VCID: 4999EB26E8B9040C8F-801C
No fault code found.
-------------------------------------------------------------------------------
Address 17: Instruments (J285) Labels:| 5K0-920-xxx-17.clb-SRI1
Part No SW: 6RF 920 862 B HW: 6RF 920 862 B
Component: KOMBI H01 0217
Serial number: 00000000000000
Coding: 1208000000
Shop #: WSC 00000 000 08192
ASAM Dataset: EV_Kombi_UDS_VDD_RM09 A05729
ROD: EV_Kombi_UDS_VDD_RM09_005_VW25.rod
VCID: 4B95D12EE2C5161CBD-801E
No fault code found.
-------------------------------------------------------------------------------
Address 19: CAN Gateway (J533) Labels: None
Part No SW: 6RU 909 901 HW: 6RU 937 086 R
Component: GW-K-CAN TP20 H42 0452
Revision: BY042001
Coding: 002300
Shop #: WSC 124697 483 00190
VCID: 19397B661099B48CFF-804C
No fault code found.
-------------------------------------------------------------------------------
Address 25: Immobilizer (J334) Labels:| 5K0-920-xxx-25.clb
Part No SW: 5K0 953 234 HW: 5K0 953 234
Component: IMMO H01 0217
Serial number:
Coding: 000000
Shop #: WSC 00000 000 00000
ASAM Dataset: EV_Immo_UDS_VDD_RM09 A03710
ROD: EV_Immo_UDS_VDD_RM09.rod
VCID: 6ADB74AA8D7FEF14A6-803E
No fault code found.
-------------------------------------------------------------------------------
Address 44: Steering Assist (J500) Labels:| 1Sx-909-144-44.clb
Part No SW: 1S2 909 144 P HW: 1S2 909 144 P
Component: EPS_ECU H61 1702
Coding: 0001000000000000
Shop #: WSC 00000 000 00000
ASAM Dataset: EV_SteerAssisNSK 014008
ROD: EV_SteerAssisNSK_014.rod
VCID: 4189F306D089CC4C57-8014
No fault code found.
-------------------------------------------------------------------------------
Address 56: Radio (J503) Labels: None
Part No SW: 6RF 035 187 C HW: 6RF 035 187 C
Component: Radio 557 5515
Revision: -------- Serial number: VWZ7Z2R8103103
Coding: 0E000400000010
Shop #: WSC 00000 000 08192
VCID: 4999EB26E0B9040C8F-801C
No fault code found.
End-------------------------(Elapsed Time: 02:20)--------------------------
My requirements are,
1. BCM max adaptation (7E0937090D)
2. Auto light with CH/LH
3. Fog light with DRL
4. No headlight mods for now, but the adaptation to support through new BCM is required
5. Dimmer cum headlight adjuster
Thanks in advance.
Thanks,
Sakthi
- ciclo
- Bling Bling Diamond Member
- Posts: 7842
- Joined: Sun Feb 24, 2013 10:20 am
- Drives: 6R'13/G7.5'19
- Location: Earth ♥, sPAIN, Magiclands (Mordor).
- Contact:
Re: BCM Max upgrade in Polo Sedan (Vento in india) manual highline
Ok. Thank you very much for providing all the information without me having to request it, you will have to wait until January, as we have talked before.
The installation will be very similar to what we have done previously for other Polo Sedan from India.
Please, tell me if you want me to provide the Dimmer along with the wiring. I have to request it from my VW dealer*.
-------
* which is a place I want to go as little as possible. (or never again, preferably)
The installation will be very similar to what we have done previously for other Polo Sedan from India.
Please, tell me if you want me to provide the Dimmer along with the wiring. I have to request it from my VW dealer*.
-------
* which is a place I want to go as little as possible. (or never again, preferably)
-
- Bronze Member
- Posts: 105
- Joined: Sat Oct 27, 2018 5:55 am
- Drives: Vento 1.5 TDI MT and Polo 6R 1.2 Tsi Dsg
- Location: Coimbatore, India
Re: BCM Max upgrade in Polo Sedan (Vento in india) manual highline
Thanks for getting back. I had ordered the Dimmer switch already so only the wiring part required.
I may get the required parts delivered sometime in December, so January should work for me. What would be the shipping time (to me/india) once you prepared the wiring.
- Sakthi
I may get the required parts delivered sometime in December, so January should work for me. What would be the shipping time (to me/india) once you prepared the wiring.
- Sakthi
- ciclo
- Bling Bling Diamond Member
- Posts: 7842
- Joined: Sun Feb 24, 2013 10:20 am
- Drives: 6R'13/G7.5'19
- Location: Earth ♥, sPAIN, Magiclands (Mordor).
- Contact:
Re: BCM Max upgrade in Polo Sedan (Vento in india) manual highline
I always say that 20-30 days (for India). It depends on the traceability of the package, sometimes it took 10 days for package delivery and other times it took 25 days.
I'll try the best for you.
I'll try the best for you.
-
- Bronze Member
- Posts: 105
- Joined: Sat Oct 27, 2018 5:55 am
- Drives: Vento 1.5 TDI MT and Polo 6R 1.2 Tsi Dsg
- Location: Coimbatore, India
Re: BCM Max upgrade in Polo Sedan (Vento in india) manual highline
That's fine. Thanks Ciclo.
Few thing to note
1. can you ensure the wiring supports the parking stalk also. I wish the windows closed upon rain (on the move / park). Does this update supports it?
2. I'm also in search for installing front PDC, can you help sourcing the items required for it. My need is, parking sensors with brackets, wiring harness. Rest of the items like PDC switch, 8k module I have it already.
3. I may want to upgrade to bi-xenon in future but not anytime soon. just a note fyi to provision/prepare the wiring.
Thanks in advance.
Few thing to note
1. can you ensure the wiring supports the parking stalk also. I wish the windows closed upon rain (on the move / park). Does this update supports it?
2. I'm also in search for installing front PDC, can you help sourcing the items required for it. My need is, parking sensors with brackets, wiring harness. Rest of the items like PDC switch, 8k module I have it already.
3. I may want to upgrade to bi-xenon in future but not anytime soon. just a note fyi to provision/prepare the wiring.
Thanks in advance.
- ciclo
- Bling Bling Diamond Member
- Posts: 7842
- Joined: Sun Feb 24, 2013 10:20 am
- Drives: 6R'13/G7.5'19
- Location: Earth ♥, sPAIN, Magiclands (Mordor).
- Contact:
Re: BCM Max upgrade in Polo Sedan (Vento in india) manual highline
1.Yes, there is no problem for the parking function in the stalk once you install the new BCM and the adaptation wiring. It will be coded in the new BCM.
Regarding the windows, will only close in case of rain if you have installed the correct WRMs (not the current ones) and the right codings for this function (RLS is perfect in your case). Please, look for help in the forum (e.g. govindsharma's topic).
2. No. I can't help you with this.
(you have many info in my topic and in the net)
3. Thanks, no problem for Bi-xenon in the future if you install the wiring for them and enter the right BCM coding.
Regarding the windows, will only close in case of rain if you have installed the correct WRMs (not the current ones) and the right codings for this function (RLS is perfect in your case). Please, look for help in the forum (e.g. govindsharma's topic).
2. No. I can't help you with this.
(you have many info in my topic and in the net)
3. Thanks, no problem for Bi-xenon in the future if you install the wiring for them and enter the right BCM coding.
-
- Bronze Member
- Posts: 105
- Joined: Sat Oct 27, 2018 5:55 am
- Drives: Vento 1.5 TDI MT and Polo 6R 1.2 Tsi Dsg
- Location: Coimbatore, India
Re: BCM Max upgrade in Polo Sedan (Vento in india) manual highline
1. Ok. For windows I'll check for the respective articles
2. I have all the info needed. All I need is a OEM parts which I'm unable to procure here and I don't want a Chinese parts from ali. It will be great if you can help me in this.
3. So I assume changing the wiring harness 10 to 14 pins and rewiring the fog to a switch and xenon SCL to BCM should work.
Thanks
Sakthi
2. I have all the info needed. All I need is a OEM parts which I'm unable to procure here and I don't want a Chinese parts from ali. It will be great if you can help me in this.
3. So I assume changing the wiring harness 10 to 14 pins and rewiring the fog to a switch and xenon SCL to BCM should work.
Thanks
Sakthi
-
- Bronze Member
- Posts: 105
- Joined: Sat Oct 27, 2018 5:55 am
- Drives: Vento 1.5 TDI MT and Polo 6R 1.2 Tsi Dsg
- Location: Coimbatore, India
Re: BCM Max upgrade in Polo Sedan (Vento in india) manual highline
Ok. upon reading through govindsharma's posts I found my car has static cornering lights works with indicators only. I would need a steering wheel sensor installed to enable to fog work on turning the steering wheel. This may require you visiting a VW dealer (sorry about it )ciclo wrote: ↑Mon Nov 26, 2018 12:37 pm 1.Yes, there is no problem for the parking function in the stalk once you install the new BCM and the adaptation wiring. It will be coded in the new BCM.
Regarding the windows, will only close in case of rain if you have installed the correct WRMs (not the current ones) and the right codings for this function (RLS is perfect in your case). Please, look for help in the forum (e.g. govindsharma's topic).
Agreed, I have all the info needed. All I need is a OEM parts which I'm unable to procure here and I don't want a Chinese parts from ali. It will be great if you can help me in this.2. No. I can't help you with this.
(you have many info in my topic and in the net)
So I assume changing the wiring harness 10 to 14 pins and rewiring the fog to a switch and xenon SCL to BCM should work. Is it possible to wire this 14 pin connector now and use the H7 halogen headlights for now. So in future once I get Bi-xenons it will be just plug and play. Or does it require reassembling few wires in future?3. Thanks, no problem for Bi-xenon in the future if you install the wiring for them and enter the right BCM coding.
At last my requirements are,
1. BCM max adaptation (7E0937090D)
2. Auto light with CH/LH
3. Fog light with DRL (it will be based on your answer on how we will do on #3 above, whether it will be 10 to 14 pin connector now and in future)
4. No headlight mods for now, but the adaptation to support through new BCM is required
5. Dimmer cum headlight adjuster
6. Steering wheel sensor to enable fog lights on turning the steering wheel
7. Any other coding updates
one note is, I already installed rear PDC connecting can lines from PDC to IC T32 28 and 29. I was referring https://drive.google.com/file/d/0B2nv91 ... FpcDA/view so based on this isolating current wiring of 28 & 29 leave the rear OPS not working.
Thanks much,
Sakthi
- ciclo
- Bling Bling Diamond Member
- Posts: 7842
- Joined: Sun Feb 24, 2013 10:20 am
- Drives: 6R'13/G7.5'19
- Location: Earth ♥, sPAIN, Magiclands (Mordor).
- Contact:
Re: BCM Max upgrade in Polo Sedan (Vento in india) manual highline
It could be problematic to install a G85 steering wheel sensor on your Vento, it may need to be adapted with ODIS.
(the govindsharma's topic it's only for you to read about the WRMs)
(the govindsharma's topic it's only for you to read about the WRMs)
-
- Bronze Member
- Posts: 105
- Joined: Sat Oct 27, 2018 5:55 am
- Drives: Vento 1.5 TDI MT and Polo 6R 1.2 Tsi Dsg
- Location: Coimbatore, India
Re: BCM Max upgrade in Polo Sedan (Vento in india) manual highline
Yes Ciclo, I read about WRM's.
And I would like to install the steering angle sensor as my current cornering supports via indicator stalk only. Would need your help on procuring the steering sensor.
Thanks,
Sakthi
And I would like to install the steering angle sensor as my current cornering supports via indicator stalk only. Would need your help on procuring the steering sensor.
Thanks,
Sakthi
-
- Bronze Member
- Posts: 105
- Joined: Sat Oct 27, 2018 5:55 am
- Drives: Vento 1.5 TDI MT and Polo 6R 1.2 Tsi Dsg
- Location: Coimbatore, India
Re: BCM Max upgrade in Polo Sedan (Vento in india) manual highline
Hi Ciclo,
A very happy new year. Just reminding you on the wiring looms I requested for.
Thanks much,
Sakthi
- ciclo
- Bling Bling Diamond Member
- Posts: 7842
- Joined: Sun Feb 24, 2013 10:20 am
- Drives: 6R'13/G7.5'19
- Location: Earth ♥, sPAIN, Magiclands (Mordor).
- Contact:
Re: BCM Max upgrade in Polo Sedan (Vento in india) manual highline
Yes, I have it in my mind.
I beg you a little of time, the holidays in Spain end on January 7th.
Now I have several projects in progress in my cars (priority over anything), however, soon I dedicate to make your wiring in my spare time.
I beg you a little of time, the holidays in Spain end on January 7th.
Now I have several projects in progress in my cars (priority over anything), however, soon I dedicate to make your wiring in my spare time.