Vento ~ Polo Sedan 1.5 Tdi RHD
- ciclo
- Bling Bling Diamond Member
- Posts: 7841
- Joined: Sun Feb 24, 2013 10:20 am
- Drives: 6R'13/G7.5'19
- Location: Earth ♥, sPAIN, Magiclands (Mordor).
- Contact:
Re: BCM Max upgrade in Polo Sedan (Vento in india) manual highline
I have added two Butt terminals in the steering column ring wiring to prevent you from having to remove the fuse box in case of other retrofits in the future. The fuses will remain the same (like in the pic).
---
I don't have the updated fuse assignment for Vento 2018 MY J (your case), but the following links will be very useful for you:
https://drive.google.com/file/d/0B2nv91 ... sp=sharing
https://drive.google.com/file/d/0B2nv91 ... sp=sharing
You must bear in mind that for the creation of your new wiring I must adapt it to the existing circumstances. (fuse slots available)
Recommendation: Save all the information in a folder, I also have it if you lose it (of all the electrical installations that I made for all those who requested my wiring).
---
Shortly I send you my email by private message so you can contact me.
---
I don't have the updated fuse assignment for Vento 2018 MY J (your case), but the following links will be very useful for you:
https://drive.google.com/file/d/0B2nv91 ... sp=sharing
https://drive.google.com/file/d/0B2nv91 ... sp=sharing
You must bear in mind that for the creation of your new wiring I must adapt it to the existing circumstances. (fuse slots available)
Recommendation: Save all the information in a folder, I also have it if you lose it (of all the electrical installations that I made for all those who requested my wiring).
---
Shortly I send you my email by private message so you can contact me.
-
- Bronze Member
- Posts: 105
- Joined: Sat Oct 27, 2018 5:55 am
- Drives: Vento 1.5 TDI MT and Polo 6R 1.2 Tsi Dsg
- Location: Coimbatore, India
Re: BCM Max upgrade in Polo Sedan (Vento in india) manual highline
Sure, I will wait for your PM. Thanks.
Last edited by sshakthi123 on Thu Jan 10, 2019 11:13 pm, edited 1 time in total.
- ciclo
- Bling Bling Diamond Member
- Posts: 7841
- Joined: Sun Feb 24, 2013 10:20 am
- Drives: 6R'13/G7.5'19
- Location: Earth ♥, sPAIN, Magiclands (Mordor).
- Contact:
Re: BCM Max upgrade in Polo Sedan (Vento in india) manual highline
Check your inbox
I forgot to tell you that the wiring for the steering ring is a gift.
The price is as indicated here: 135 € + shipping cost.
Shipping costs (SP-IND): 600gr approx = 25,20€ ( pg 5, certificated)
Total = 160 €
I forgot to tell you that the wiring for the steering ring is a gift.
The price is as indicated here: 135 € + shipping cost.
Shipping costs (SP-IND): 600gr approx = 25,20€ ( pg 5, certificated)
Total = 160 €
-
- Bronze Member
- Posts: 105
- Joined: Sat Oct 27, 2018 5:55 am
- Drives: Vento 1.5 TDI MT and Polo 6R 1.2 Tsi Dsg
- Location: Coimbatore, India
Re: BCM Max upgrade in Polo Sedan (Vento in india) manual highline
Thank you very much Ciclo. I had sent an email as well as PM.ciclo wrote: ↑Thu Jan 10, 2019 7:27 pm Check your inbox
I forgot to tell you that the wiring for the steering ring is a gift.
The price is as indicated here: 135 € + shipping cost.
Shipping costs (SP-IND): 600gr approx = 25,20€ ( pg 5, certificated)
Total = 160 €
-
- Bronze Member
- Posts: 105
- Joined: Sat Oct 27, 2018 5:55 am
- Drives: Vento 1.5 TDI MT and Polo 6R 1.2 Tsi Dsg
- Location: Coimbatore, India
Re: BCM Max upgrade in Polo Sedan (Vento in india) manual highline
Ciclo,
One doubt rise up, this wiring supports single side park option right. Just wanted to know.
Also you will share other coding updates after the BCM adaptation I believe. Please confirm.
Thanks much,
Sakthi
One doubt rise up, this wiring supports single side park option right. Just wanted to know.
Also you will share other coding updates after the BCM adaptation I believe. Please confirm.
Thanks much,
Sakthi
- ciclo
- Bling Bling Diamond Member
- Posts: 7841
- Joined: Sun Feb 24, 2013 10:20 am
- Drives: 6R'13/G7.5'19
- Location: Earth ♥, sPAIN, Magiclands (Mordor).
- Contact:
Re: BCM Max upgrade in Polo Sedan (Vento in india) manual highline
Yes to both questions.
Read the first page of my thread (links) ...
But don't code anything posted there until you check that all the lights work correctly with the new BCM coding posted here in your thread.
Otherwise, I will ask you infinites Autoscans to be able to answer to your future questions...
Read the first page of my thread (links) ...
But don't code anything posted there until you check that all the lights work correctly with the new BCM coding posted here in your thread.
Otherwise, I will ask you infinites Autoscans to be able to answer to your future questions...
-
- Bronze Member
- Posts: 105
- Joined: Sat Oct 27, 2018 5:55 am
- Drives: Vento 1.5 TDI MT and Polo 6R 1.2 Tsi Dsg
- Location: Coimbatore, India
Re: BCM Max upgrade in Polo Sedan (Vento in india) manual highline
Got it. I'll follow it and ask for queries. Thanks.ciclo wrote: ↑Fri Jan 11, 2019 7:15 am Yes to both questions.
Read the first page of my thread (links) ...
But don't code anything posted there until you check that all the lights work correctly with the new BCM coding posted here in your thread.
Otherwise, I will ask you infinites Autoscans to be able to answer to your future questions...
-
- Bronze Member
- Posts: 105
- Joined: Sat Oct 27, 2018 5:55 am
- Drives: Vento 1.5 TDI MT and Polo 6R 1.2 Tsi Dsg
- Location: Coimbatore, India
Re: BCM Max upgrade in Polo Sedan (Vento in india) manual highline
Ciclo,ciclo wrote: ↑Fri Jan 11, 2019 7:15 am Yes to both questions.
Read the first page of my thread (links) ...
But don't code anything posted there until you check that all the lights work correctly with the new BCM coding posted here in your thread.
Otherwise, I will ask you infinites Autoscans to be able to answer to your future questions...
I tried mapping fuse terminals A/B ahead of actual installation. I felt difficult in finding a / b mapping in my fuse carrier. Can you assist circling the terminals?
Thanks,
Sakthi
- ciclo
- Bling Bling Diamond Member
- Posts: 7841
- Joined: Sun Feb 24, 2013 10:20 am
- Drives: 6R'13/G7.5'19
- Location: Earth ♥, sPAIN, Magiclands (Mordor).
- Contact:
Re: BCM Max upgrade in Polo Sedan (Vento in india) manual highline
https://drive.google.com/file/d/0B2nv91 ... 9WUzA/view
A or B is indicated on the back of the fusebox, near to slots. You must separate / move the wires to see the correspondence (it is not easy to see, help yourself with a flashlight).
Do not assume that it is the same position A or B in the same row of fuses. You should check these positions in each fuse slot on the back.
Click on the link of installation guide where it says180º. It will help you.
A or B is indicated on the back of the fusebox, near to slots. You must separate / move the wires to see the correspondence (it is not easy to see, help yourself with a flashlight).
Do not assume that it is the same position A or B in the same row of fuses. You should check these positions in each fuse slot on the back.
Click on the link of installation guide where it says180º. It will help you.
-
- Bronze Member
- Posts: 105
- Joined: Sat Oct 27, 2018 5:55 am
- Drives: Vento 1.5 TDI MT and Polo 6R 1.2 Tsi Dsg
- Location: Coimbatore, India
Re: BCM Max upgrade in Polo Sedan (Vento in india) manual highline
Hello Ciclo,
Successfully installed the BCM and other parts as planned. Checked all the lights and electronics and it works fine.
However getting below mentioned errors. Also attached the latest auto scan report. Please help me fixing it.
Issues facing
1. Auto close windows not working (kept the windows down and locked the car. It left the windows as it is though I set the one touch up and down already)
2. CH/LH - light switch in auto, wiper setting in auto, masked the rain sensor to check in daytime. Got down the car and locking the remote is not lighting up. However unlocking the car glows up the light. Tried by keeping the headlight stalk to both high beam and low beam.
3. Auto close windows on detecting rain in running or in park mode NOT working
4. Single side park stalk is not working
5. Central electronics errors for DRL bulbs
6. Steering angle sensor calibration error
low priority
7. DRL's going off when parking/headlights on. If possible I prefer leaving it ON always so I will have better illumination on the road.
8. DRL is NOT going off upon indicator (pls provide coding for turning this on/off on enabling indicator. Based on my likes I will turn this on or off)
9. Dimmer - I thought it will dark off completely. Is there a way to control more darkness?
Also need a list of additional features that can be enabled from this BCM max
Scan report,
Few pictures below taken during installation. I will add up the output pictures once done with the coding.
I would like to thank everyone who had helped me to come this long way. Especially Ciclo who helped making wires though he discontinued it. Thanks again.
Best Regards,
Sakthi
Successfully installed the BCM and other parts as planned. Checked all the lights and electronics and it works fine.
However getting below mentioned errors. Also attached the latest auto scan report. Please help me fixing it.
Issues facing
1. Auto close windows not working (kept the windows down and locked the car. It left the windows as it is though I set the one touch up and down already)
2. CH/LH - light switch in auto, wiper setting in auto, masked the rain sensor to check in daytime. Got down the car and locking the remote is not lighting up. However unlocking the car glows up the light. Tried by keeping the headlight stalk to both high beam and low beam.
3. Auto close windows on detecting rain in running or in park mode NOT working
4. Single side park stalk is not working
5. Central electronics errors for DRL bulbs
6. Steering angle sensor calibration error
low priority
7. DRL's going off when parking/headlights on. If possible I prefer leaving it ON always so I will have better illumination on the road.
8. DRL is NOT going off upon indicator (pls provide coding for turning this on/off on enabling indicator. Based on my likes I will turn this on or off)
9. Dimmer - I thought it will dark off completely. Is there a way to control more darkness?
Also need a list of additional features that can be enabled from this BCM max
Scan report,
Code: Select all
Tuesday,19,February,2019,08:05:36:00006
VCDS -- Windows Based VAG/VAS Emulator Running on Windows 8.1 x64
VCDS Version: 18.2.0.3 (x64)
Data version: 20180212 DS287.0
www.Ross-Tech.com
VIN: MEXJ1760XJT075118 License Plate: 8854-NEW
Mileage: 18060km-11221mi Repair Order:
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Chassis Type: 60-VW25 (7E0)
Scan: 01 03 04 08 09 10 15 17 19 25 44 56
VIN: MEXJ1760XJT075118 Mileage: 18060km-11221miles
01-Engine -- Status: OK 0000
03-ABS Brakes -- Status: OK 0000
04-Steering Angle -- Status: OK 0000
08-Auto HVAC -- Status: OK 0000
09-Cent. Elect. -- Status: Malfunction 0010
10-Park/Steer Assist -- Status: OK 0000
15-Airbags -- Status: OK 0000
17-Instruments -- Status: OK 0000
19-CAN Gateway -- Status: OK 0000
25-Immobilizer -- Status: OK 0000
44-Steering Assist -- Status: OK 0000
56-Radio -- Status: OK 0000
-------------------------------------------------------------------------------
Address 01: Engine (J623-CWXC) Labels: None
Part No SW: 03L 906 023 RS HW: 03L 907 425 B
Component: R4 1.5l TDI H33 9977
Revision: --H33--- Serial number:
Coding: 00110116032500080000
Shop #: WSC 00000 000 08192
ASAM Dataset: EV_ECM15TDI02103L906023RS 001002
ROD: EV_ECM15TDI02103L906023QT.rod
VCID: 081F2E22B3333D0450-805C
No fault code found.
Readiness: 0 0 0 0 1
-------------------------------------------------------------------------------
Address 03: ABS Brakes (J104) Labels: None
Part No SW: 6R0 907 379 CA HW: 6R0 907 379 AQ
Component: ABS9.0 front H01 0004
Serial number: --------------
Coding: 60DD2F63212A04C50615F46A845920020000
Shop #: WSC 00000 000 08192
ASAM Dataset: EV_Brake1ABS90BOSCH 003017
ROD: EV_Brake1ABS90BOSCH_VW25.rod
VCID: 7F0DB5FEE6FD7ABC61-802A
No fault code found.
-------------------------------------------------------------------------------
Address 04: Steering Angle (G085) Labels:* 6R0-959-654.clb
Part No SW: 6R0 959 654 HW: 6R0 959 654
Component: LENKW.SENSOR H07 0070
Serial number: 03111813470922
Coding: 01
Shop #: WSC 00000 000 00000
ASAM Dataset: EV_LWSKLOVW25X 005001
ROD: EV_LWSKLOVW25X.rod
VCID: 7EF348FAE1F773B46A-802A
1 Fault Found:
1140738 - Steering angle sensor
B1168 54 [009] - Missing Calibration / Basic Setting
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 2
Fault Frequency: 1
Reset counter: 1
Mileage: 18063 km
Date: 2015.05.30
Time: 14:12:49
Voltage terminal 15: 12.20 V
Voltage terminal 30: 12.40 V
Terminal 15 status: On
-------------------------------------------------------------------------------
Address 08: Auto HVAC (J255) Labels: 6R0-907-044.clb
Part No SW: 6R0 907 044 Q HW: 6R0 907 044 Q
Component: Climatronic H12 0615
Revision: V0000000
VCID: 4189F306D889CC4C57-8014
No fault code found.
-------------------------------------------------------------------------------
Address 09: Cent. Elect. (J519) Labels:. 7E0-937-BCM-V1.clb
Part No SW: 7E0 937 090 D HW: 7E0 937 090 D
Component: BCM PQ25 Max4 H82 0762
Revision: B9082001 Serial number: 8601 222180856
Coding: 3B904BFF48A10000013806407EEB96904980600F608C2141220000030000
Shop #: WSC 12345 123 12345
VCID: 2C57B2B24F0B312494-8078
Subsystem 1 - Part No: 5K7 955 559 C Labels: 5K7-955-559.CLB
Component: RLS 290617 04 42 0106
Coding: 066800
Subsystem 2 - Part No SW: 6R0 959 802 EF HW: 6R0 959 802 EF Labels: 6R0-959-802.CLB
Component: J386__TSG_FT 023 2521
Serial number: 13202848170704050535
Coding: 000000
Subsystem 3 - Part No SW: 6R0 959 801 ED HW: 6R0 959 801 ED Labels: 6R0-959-801.CLB
Component: J387__TSG_BT 023 2521
Serial number: 13102849170705002249
Coding: 000000
Subsystem 4 - Part No SW: 6C0 959 442 HW: 6C0 959 442
Component: E221__MFL-TAT H06 0023
Serial number: 1811713320101504AB1B
Coding: 240000
Subsystem 5 - Part No SW: 6R0 959 811 S HW: 6R0 959 811 S
Component: J388__TSG_HL 022 1522
Serial number: 13102728170704212031
Coding: 000000
Subsystem 6 - Part No SW: 6R0 959 812 S HW: 6R0 959 812 S
Component: J389__TSG_HR 022 1522
Serial number: 13102729170630002341
Coding: 000000
2 Faults Found:
02745 - Bulb for Daytime Running Light; Left
010 - Open or Short to Plus
Freeze Frame:
Fault Status: 01101010
Fault Priority: 3
Fault Frequency: 1
Reset counter: 1
Mileage: 18063 km
Time Indication: 0
Date: 2015.05.30
Time: 14:12:53
02746 - Bulb for Daytime Running Light; Right
010 - Open or Short to Plus
Freeze Frame:
Fault Status: 01101010
Fault Priority: 3
Fault Frequency: 1
Reset counter: 1
Mileage: 18063 km
Time Indication: 0
Date: 2015.05.30
Time: 14:12:53
-------------------------------------------------------------------------------
Address 10: Park/Steer Assist (J446) Labels:| 7E0-919-475.clb
Part No SW: 7E0 919 475 K HW: 7N0 919 475
Component: PARKHILFE 8K H06 0106
Revision: -------- Serial number: 28231325304021
Coding: 308002
Shop #: WSC 12345 123 12345
ASAM Dataset: EV_VW75XParkAssis4K 001004
ROD: EV_VW75XParkAssis4K_001.rod
VCID: 3A7B84EABD5F9F9416-806E
No fault code found.
-------------------------------------------------------------------------------
Address 15: Airbags (J234) Labels:| 5K0-959-655.clb
Part No SW: 6R0 959 655 J HW: 6R0 959 655 J
Component: VW10AirbagU06 H10 0020
Revision: -------- Serial number: 003GW01BGFS-
Coding: 003036
Shop #: WSC 00000 000 08192
ASAM Dataset: EV_AirbaVW10BPAVW250 A01001
ROD: EV_AirbaVW10BPAVW250.rod
VCID: 4999EB26E8B9040C8F-801C
No fault code found.
-------------------------------------------------------------------------------
Address 17: Instruments (J285) Labels:| 5K0-920-xxx-17.clb-SRI1
Part No SW: 6RF 920 862 B HW: 6RF 920 862 B
Component: KOMBI H01 0217
Serial number: 00000000000000
Coding: 1208000000
Shop #: WSC 00000 000 08192
ASAM Dataset: EV_Kombi_UDS_VDD_RM09 A05729
ROD: EV_Kombi_UDS_VDD_RM09_005_VW25.rod
VCID: 4B95D12EE2C5161CBD-801E
No fault code found.
-------------------------------------------------------------------------------
Address 19: CAN Gateway (J533) Labels:. 7E0-909-901.clb
Part No SW: 7E0 909 901 HW: 7E0 937 090 D
Component: GW-K-CAN TP20 H82 0762
Revision: B9082001
Coding: 002300
Shop #: WSC 12345 123 12345
VCID: 68DF0EA29B73DD04B0-803C
No fault code found.
-------------------------------------------------------------------------------
Address 25: Immobilizer (J334) Labels:| 5K0-920-xxx-25.clb
Part No SW: 5K0 953 234 HW: 5K0 953 234
Component: IMMO H01 0217
Serial number:
Coding: 000000
Shop #: WSC 00000 000 00000
ASAM Dataset: EV_Immo_UDS_VDD_RM09 A03710
ROD: EV_Immo_UDS_VDD_RM09.rod
VCID: 6ADB74AA8D7FEF14A6-803E
No fault code found.
-------------------------------------------------------------------------------
Address 44: Steering Assist (J500) Labels:| 1Sx-909-144-44.clb
Part No SW: 1S2 909 144 P HW: 1S2 909 144 P
Component: EPS_ECU H61 1702
Coding: 0001000000000000
Shop #: WSC 00000 000 00000
ASAM Dataset: EV_SteerAssisNSK 014008
ROD: EV_SteerAssisNSK_014.rod
VCID: 4189F306D089CC4C57-8014
No fault code found.
-------------------------------------------------------------------------------
Address 56: Radio (J503) Labels: None
Part No SW: 6RF 035 187 C HW: 6RF 035 187 C
Component: Radio 557 5515
Revision: -------- Serial number: VWZ7Z2R8103103
Coding: 0E000440000010
Shop #: WSC 12345 123 08192
VCID: 4999EB26E0B9040C8F-801C
No fault code found.
End-------------------------(Elapsed Time: 02:27)--------------------------
I would like to thank everyone who had helped me to come this long way. Especially Ciclo who helped making wires though he discontinued it. Thanks again.
Best Regards,
Sakthi
- ciclo
- Bling Bling Diamond Member
- Posts: 7841
- Joined: Sun Feb 24, 2013 10:20 am
- Drives: 6R'13/G7.5'19
- Location: Earth ♥, sPAIN, Magiclands (Mordor).
- Contact:
Re: BCM Max upgrade in Polo Sedan (Vento in india) manual highline
Hi, once I've read everything you've written (wtf?), it's clear that you don't know how some lights or systems work.
Why have you modified the BCM Max coding that I proposed? It is not necessary to answer this question.
-this coding: (my proposal)
3A904BFF48A10000013806406FEB96904980600F608C2141220000030000
-It's not like this: (your current coding)
3B904BFF48A10000013806407EEB96904980600F608C2141220000030000
---
I'll provide you a minimal assistance in those parts that are not related to BCM adaptation or automatic lights. You were warned about this several times.
Step by step to avoid confusion:
You must keep the remote control lock button pressed. Report the result.
Why have you modified the BCM Max coding that I proposed? It is not necessary to answer this question.
-this coding: (my proposal)
3A904BFF48A10000013806406FEB96904980600F608C2141220000030000
-It's not like this: (your current coding)
3B904BFF48A10000013806407EEB96904980600F608C2141220000030000
---
I'll provide you a minimal assistance in those parts that are not related to BCM adaptation or automatic lights. You were warned about this several times.
Step by step to avoid confusion:
Make sure again that the window comfort feature (one touch) is set for all doors. (user's manual, owner's manual)sshakthi123 wrote: ↑Mon Feb 18, 2019 6:30 am 1. Auto close windows not working (kept the windows down and locked the car. It left the windows as it is though I set the one touch up and down already)
You must keep the remote control lock button pressed. Report the result.
- ciclo
- Bling Bling Diamond Member
- Posts: 7841
- Joined: Sun Feb 24, 2013 10:20 am
- Drives: 6R'13/G7.5'19
- Location: Earth ♥, sPAIN, Magiclands (Mordor).
- Contact:
Re: BCM Max upgrade in Polo Sedan (Vento in india) manual highline
It's how it should work.sshakthi123 wrote: ↑Mon Feb 18, 2019 6:30 am
2. CH/LH - light switch in auto, wiper setting in auto (It is not necessary), masked the rain sensor to check in daytime. Got down the car and locking the remote is not lighting up. However unlocking the car glows up the light. Tried by keeping the headlight stalk to both high beam and low beam.
Remember the Coming Home function is semi-automatic.
- Take out the key from the ignition switch.
- pull from the High Beam lever/flash once.
- open the driver's door and the lights should turn on.
-
- Bronze Member
- Posts: 105
- Joined: Sat Oct 27, 2018 5:55 am
- Drives: Vento 1.5 TDI MT and Polo 6R 1.2 Tsi Dsg
- Location: Coimbatore, India
Re: BCM Max upgrade in Polo Sedan (Vento in india) manual highline
Hi Ciclo,
Thanks,
Sakthi
The intention behind changing the coding is to enable emergency flashers and switch off parking lights when DRL is active. If at all require I can revert to your coding. Rest of the options I didn't change.ciclo wrote: ↑Tue Feb 19, 2019 1:33 pm Hi, once I've read everything you've written (wtf?), it's clear that you don't know how some lights or systems work.
Why have you modified the BCM Max coding that I proposed? It is not necessary to answer this question.
-this coding: (my proposal)
3A904BFF48A10000013806406FEB96904980600F608C2141220000030000
-It's not like this: (your current coding)
3B904BFF48A10000013806407EEB96904980600F608C2141220000030000
I'm pleased. Thanks.
Verified once, the comfort feature is all set. One touch up/down works fine from driver door switches, also the remote operation works fine.
Thanks,
Sakthi
- ciclo
- Bling Bling Diamond Member
- Posts: 7841
- Joined: Sun Feb 24, 2013 10:20 am
- Drives: 6R'13/G7.5'19
- Location: Earth ♥, sPAIN, Magiclands (Mordor).
- Contact:
Re: BCM Max upgrade in Polo Sedan (Vento in india) manual highline
Please, keep calm for the rest of supposed issues, at this moment my internet service provider is giving me a low quality signal instead of the one I have contracted.
We all know how difficult it is to do something in these conditions.
We all know how difficult it is to do something in these conditions.
-
- Bronze Member
- Posts: 105
- Joined: Sat Oct 27, 2018 5:55 am
- Drives: Vento 1.5 TDI MT and Polo 6R 1.2 Tsi Dsg
- Location: Coimbatore, India