Hello
ciclo and other Polo's fan.
I apologize for the long time without updates.
I recently had some free time to spend on my car and I can tell you about that.
First of all I purchased a new MFSW of a 6C (R-Line) and I mounted It.
Thanks to
ciclo who supported me with BCM upgrade I just had to "plug and play" the new steering wheel to make It work like a charm (buttoms lights/functions and horn).
Secondly I replaced gear shifter and the handbrake cover with a 6C one (R-Line
I am not sure about that) which I purchased sometime ago
used from ebay.
They have some minor signs but they looks much better than previous one. I apologize I do not have a picture on the car but I will add It later.
In the end I replaced battery of my alarm horn; my hope was to solve the autoscan error.
Unfortunatelly, even If I replaced both internal batteries with new one, error remains. Ok It was a try since batteries were less expensive than a new horn.
Since Ross-Tech suggest that this error could be possibly caused by:
Fuse(s) faulty --> NO
Wiring and/or Connector(s) from/to Alarm Horn (H12) faulty --> MAYBE (I can check wirings prior to change the horn, maybe I am lucky)*
Alarm Horn (H12) faulty --> MAYBE, but batteries are brand new so the issue is somewhere else.
*The fact that leave me surprised is that alarm horn seems works correctly.
Keep tuned!