Permanent Dash Cam

Chat about your 2018+ AW/BZ/AE model Polos here!
Post Reply
sc-red
New
Posts: 42
Joined: Mon Jan 27, 2020 8:37 am
Drives: VW Polo GTI+
Location: Aberdeenshire

Permanent Dash Cam

Post by sc-red »

Hi all, just wondering if anyone has permanently installed a dash cam to their car. If so, where have you picked the power up from? TIA
monkeyhanger
Bling Bling Diamond Member
Posts: 2643
Joined: Fri Feb 23, 2018 9:58 pm
Drives: Audi A4 Avant Quattro 40 TDI, Polo GTI+
Location: Newcastle upon Tyne

Re: Permanent Dash Cam

Post by monkeyhanger »

sc-red wrote: Sun Feb 02, 2020 5:15 pm Hi all, just wondering if anyone has permanently installed a dash cam to their car. If so, where have you picked the power up from? TIA
Yes, I have. It's on a guide somewhere on this forum. My Thinkware F770 front and back set has 2 live feeds, a permanent live (for parking monitoring) and a switched live (for driving), each feeding off a different fuse.

Does yours have parking monitoring mode with car battery management so that the cameras will shut off if the car battery drops to a certain voltage threshold? If not, you'll only require a switched live feed.

Switched fuse to use = F55 (cigarette lighter socket).
Permanent live fuse to use = F6 (central locking).

If you look up thread "dashcam cable routing" you'll see my installation guide with plenty of photos if you need some guidance.
sc-red
New
Posts: 42
Joined: Mon Jan 27, 2020 8:37 am
Drives: VW Polo GTI+
Location: Aberdeenshire

Re: Permanent Dash Cam

Post by sc-red »

monkeyhanger wrote: Sun Feb 02, 2020 5:21 pm
sc-red wrote: Sun Feb 02, 2020 5:15 pm Hi all, just wondering if anyone has permanently installed a dash cam to their car. If so, where have you picked the power up from? TIA
Yes, I have. It's on a guide somewhere on this forum. My Thinkware F770 front and back set has 2 live feeds, a permanent live (for parking monitoring) and a switched live (for driving), each feeding off a different fuse.

Does yours have parking monitoring mode with car battery management so that the cameras will shut off if the car battery drops to a certain voltage threshold? If not, you'll only require a switched live feed.

Switched fuse to use = F55 (cigarette lighter socket).
Permanent live fuse to use = F6 (central locking).

If you look up thread "dashcam cable routing" you'll see my installation guide with plenty of photos if you need some guidance.
Thanks for the info. Not purchased the cam yet but was thinking of getting a permanent powered cam for added security as per yours. I’ll go search the thread as you’ve noted and see where things go from there.

Thanks.
Post Reply