Reverse Lamp and Camera disappeared after BCM max Upgrade

Post by **ciclo** » Sat Feb 29, 2020 4:54 am

I think it would be best if you go to a local locksmith, after all and if you don't have the necessary tools the blade has to be carved/copied.

ZahariGeorgiev · Post by **ZahariGeorgiev** » Sat Feb 29, 2020 3:39 pm

Hi ciclo,
I was already at the local locksmith, and the blade they offer me, was just terrible, when we remove the original blade and insert the new one, that new one is hitting the key fob! When fold the key, i cannot unfold it because of the bad quality of the blade .... its not like the OEM... That's why i ask here if some one know is there any OEM blades, or at least some high quality ....

ZahariGeorgiev · Post by **ZahariGeorgiev** » Thu Mar 05, 2020 8:18 am

Hello guys,
Yesterday i install my new RLS - 5K7955559 B, and everything is working perfect! Thanks to you!
Now, my next plan is to get those pretty eyes:

And as far i as i know, i should also retrofit "Auto leveling headlight system" and "Headlight washer system".Right?

Also wondering of front and rear optic parking system and maybe to get rid of the R-line body kit and go to WRC

Post by **ciclo** » Fri Mar 06, 2020 2:18 am

ZahariGeorgiev wrote: ↑Thu Mar 05, 2020 8:18 am Hello guys,
Yesterday i install my new RLS - 5K7955559 B, and everything is working perfect! Thanks to you!

Great!

ZahariGeorgiev · Post by **ZahariGeorgiev** » Fri Mar 06, 2020 8:47 am

Hello ciclo,

For now i only gathering information. ( money also

)
I found that kufatec offer 2 sets:

https://www.kufatec.com/en/volkswagen/v ... o-6r-39409
https://www.kufatec.com/en/volkswagen/v ... o-6r-37920

Got offer for second hand full led headlight set - for 400 euro. And wondering to buy them or not to buy...
This gonna be expensive retrofit - around 1400 for all (2 headlights, automatic headlight range control, headlight washer system and new switch for adjustment of interior lighting, without manual headlight leveling)

Is that all necessary parts for this retrofit? (Also gonna need new bumper for washing system - already thinking about WRC - and about that WRC: is this washing system that kufatec offer, is it compatible with this bumper? The covers look the same)

Post by **ciclo** » Mon Mar 09, 2020 6:50 am

Hi Zahari

ETKA online -> viewtopic.php?f=10&t=42713&p=466570#p466570 (learn how to use it, it will be very useful for you and your new project)

According to ETKA, the headlight wash system covers for the WRC front bumper are not the same (not the same ref number) as other 6R front bumpers.
R-line = PR code 2JP
WRC = PR code 2JQ

Maybe you should specify if you buy this system in Kufatec.

---

For the automatic headlight range control, you must keep in mind that the AFS unit and the rear sensor must be specific to the POLO 6C and must be electronically compatible. Buy exactly what the ETKA specifically indicates for POLO 6C (2015-->, Europe). Buy them from the VW dealer (with PR codes), or have the absolute certainty that both components come from a Polo 6C with LED headlights from the factory if they are second-hand.
The Kufatec link shown above is not for 6C LED headlights, it is for 6R or 6R bixenon.

---

WD Led headlights 6R-family (PQ25)
https://drive.google.com/file/d/1x2piv7 ... s4vFQ/view

It may be necessary to modify the electrical installation (wiring) of the area between BCM, fuse box, stalks (possible new stalks), and light switch.
Take into account that the high beam (both headlights) must be controlled by the BCM (PIN 1 on both T73 connectors of the BCM)

Similar to this -> https://drive.google.com/file/d/0B2nv91 ... VJSzA/view

---

It will be necessary to parameterize your 7E0 BCM with VCP if it does not come from a T6 with LED headlights so that the front side lights (LED modules) work correctly.
A new BCM coding is required according to electrical installation (wiring).

---

You must be very precise in this project so that it ends up working.

I hope this help is useful for you, I will try to help you if the reduced free time I have allows me to do it...

ZahariGeorgiev · Post by **ZahariGeorgiev** » Mon Mar 09, 2020 7:07 pm

Hi ciclo,
As always full info from you. I really appreciate that!
So i am still wondering for those new lights.... the main problem for me is: that i got blacked my headlights, and here in my county this is illegal

And i always have to drive with turn on headlights, in order to be not so obviously. Is there any coding for always on DRL via low beam? If yes i will leave my headlights like that and get rid of the R-line body kit, and go to full black WRC bad-ass look, just gonna retrofit front and rear PDC and headlight wash system.

Post by **ciclo** » Tue Mar 10, 2020 5:03 am

Perhaps it is possible, no one asked me about operating the DRLs using the low beam lamps (H7) with a BCM Max installed, that's why we never tried it.

In BCM enable Byte23 Bit 3 (I guess Bit 6 must be enabled).

Tell us the results.

---
Maybe there is a bulb fault (warning) in the IC, ...no problem, we will try to code other Bytes to fix it... post the autoscan.

ZahariGeorgiev · Post by **ZahariGeorgiev** » Wed Mar 11, 2020 8:28 pm

Hello ciclo,

Did i miss something or there is no Bit 3 here

Post by **ciclo** » Thu Mar 12, 2020 3:24 am

For example:

...by ciclo

---

amer6R · Post by **amer6R** » Fri Mar 13, 2020 10:21 pm

Do you know how hard would be to add second reverse bulb. We all know that 6r has only one... ( Bit stupid if you ask me)

Sent from my Nokia 6.1 Plus using Tapatalk

Post by **iichel** » Sat Mar 14, 2020 8:23 am

Technically it's not so difficult with a RHD unit on the left and a LHD unit on the right. This way you have two clear lenses.
Now you need to route a new wire from the right to the left to power this light

Disadvantage: you lose the rear fog light on the left. (Or right if you're driving on the wrong side of the road)
Solution: dual colour LED (red/white), but it makes the connection a bit more complicated.

I made this myself and I have two reverse lights and two rear fog lights.

ZahariGeorgiev · Post by **ZahariGeorgiev** » Sun Mar 15, 2020 3:38 pm

Hello guys,

I manage to code my BCM to use low beam as DRLs. Next week will post auto scan.

iichel,

One of my next upgrade is to go from 6r taillights to 6c (just waiting for one of the terminals for the adapters). I read your post for double reverse light:

viewtopic.php?f=56&t=65724&hilit=Wiper+stalk&start=45

, and want to ask you if can you provide new link for that double color led

Post by **iichel** » Sun Mar 15, 2020 4:13 pm

I tried to find the link, but I was not able to find the link to the dual colour LED lights, I'm sorry.

Post by **ciclo** » Mon Mar 16, 2020 6:12 am

ZahariGeorgiev wrote: ↑Sun Mar 15, 2020 3:38 pm

I manage to code my BCM to use low beam as DRLs. Next week will post auto scan.

UK-POLOS.NET - THE VW Polo Forum

Reverse Lamp and Camera disappeared after BCM max Upgrade

Re: Reverse Lamp and Camera disappeared after BCM max Upgrade

Re: Reverse Lamp and Camera disappeared after BCM max Upgrade

Re: Reverse Lamp and Camera disappeared after BCM max Upgrade

Re: Reverse Lamp and Camera disappeared after BCM max Upgrade

Re: Reverse Lamp and Camera disappeared after BCM max Upgrade

Re: Reverse Lamp and Camera disappeared after BCM max Upgrade

Re: Reverse Lamp and Camera disappeared after BCM max Upgrade

Re: Reverse Lamp and Camera disappeared after BCM max Upgrade

Re: Reverse Lamp and Camera disappeared after BCM max Upgrade

Re: Reverse Lamp and Camera disappeared after BCM max Upgrade

Re: Reverse Lamp and Camera disappeared after BCM max Upgrade

Re: Reverse Lamp and Camera disappeared after BCM max Upgrade

Re: Reverse Lamp and Camera disappeared after BCM max Upgrade

Re: Reverse Lamp and Camera disappeared after BCM max Upgrade

Re: Reverse Lamp and Camera disappeared after BCM max Upgrade