hello
i have polo gti 2013 (6R)
Could anyone give me some advice on how to remove center vents please?
is there any pictures / manual installation ?
thanks .
just remove the panel + 4 screws and pull out the radio ?
https://www.youtube.com/watch?v=fyqaXV2eXwE
center vents removal - help
center vents removal - help
Last edited by kfirg on Fri Jul 31, 2020 10:25 am, edited 2 times in total.
-
- Bling Bling Diamond Member
- Posts: 5887
- Joined: Sat Dec 30, 2006 9:12 pm
- Drives: B8 S4 & 6R/6C1 1.2TSI 110
- Location: Mid Lothian
Re: center vents removal - help
Audi vents have small holes drilled into each frame, and the plan is to use an "L" shaped tool to pull them out - the holes, if VW also provide this method of extraction are located quite far back into the housings.
-
- Platinum Member
- Posts: 1118
- Joined: Thu Feb 06, 2020 7:57 am
- Drives: Polo 6R 2010 1.6 TDI
- Location: budget build
Re: center vents removal - help
You have to remove the radio, and remove the plastic bravket that goes over the whole thing because the vent is behind it.
Re: center vents removal - help
in the video he removed the panel (trim) and 4 screwes .
thats all ?
thats all ?
Re: center vents removal - help
It does not look as simple as it seems..
- ag69
- Silver Member
- Posts: 430
- Joined: Fri May 26, 2017 10:39 am
- Drives: 1.2TSi 77Kw 7DSG
- Location: Earth
Re: center vents removal - help
Yes.
Well i had removed mine center vents to replace dummy buttons. It was quite work.
Removing trim, screw and radio is not difficult.
I don't recollect but cage is quite hard to move.
Well i had removed mine center vents to replace dummy buttons. It was quite work.
Removing trim, screw and radio is not difficult.
I don't recollect but cage is quite hard to move.