Brake upgrade

[iichel]

Good. Have a look here as well, for some more info regarding coding of your ABS/ESP unit.
viewtopic.php?f=56&t=74520

[grpolo]

Ok i can see the brakes control unit no idea where to look advanced identification? Long coding ? Adaptation ? Basic setting ????

Sent from my SM-G935F using Tapatalk

[iichel]

long coding please

[grpolo]

Control unit: 03 Brakes
System description: ESP9.0i front
Software number: 6R0907379AS
Software version: 0003
Hardware number: 6R0907379AS
Hardware version: H03
Serial number: --------------
ODX name: EV_Brake1ESP90iBOSCH
ODX version: 003020
Backup name:
Long coding:
21DD2885412400C284141469825200520905
Adaptations:
Hill-start assistant:
---:
normal
XCP calibration protocol:
---:
Not activated
Straight ahead brake stabilization:
---:
activated
Roller test bench mode:
---:
activated
Overboost in brake system:
---:
120BAR
Hydraulic brake assistant:
---:
normal
Expanded electronic differential lock:
---:
medium
Rear axle hard braking:
---:
activated
Tire pressure monitoring display:
---:
2
Tire pressure monitoring display, tire selection:
---:
0
Engine drag torque control:
---:
activated
Activating and deactivating all development messages:
VW Messages:
Not activated
BOSCH Messages:
Not activated
Dynamic Messages 1:
Not activated
Dynamic Messages 2:
Not activated
Dynamic Messages 3:
Not activated
Advanced identification:
Number of programming attempts:
Bootloader:
1
Application:
0
Maximum number of possible update programming:
Bootloader:
1
Application:
90
Date of last coding:
Year:
0
Month:
0
Day:
0
FAZIT-identification:
Manufacture location index:
BPA-085
Day of manufacture:
24.09.13
Manufacturer- test stand number:
0060
Running manufacturer number:
1423
Diagnostic mode:
---:
VW - diagnostic mode
VW/Audi part number:
---:
6R0907379AS
SoftwareVersion:
---:
0003
Serial number:
---:
--------------
Hardware part number:
---:
6R0907379AS
System description:
---:
ESP9.0i front
Adaptation workshop code:
Device number:
0
Importer number:
0
Dealership number:
0
Date of last adaptation:
Year:
0
Month:
0
Day:
0
ASAM/ODX file identification:
---:
EV_Brake1ESP90iBOSCH
ASAM/ODX file version:
---:
003020
HardwareVersion:
---:
H03
Coding workshop code:
Device number:
8
Importer number:
769
Dealership number:
1281
System abbreviation:
---:
J104
Versions of software module:
Number of possible access authorizations:
Number Of Logins:
10
Programmability status:
Programmability:
programmable
Program consistency:
Program present

[iichel]

This is your old coding: 21DD2885412400C284141469825200520905
Coding for 288 front, 232 rear: 21DD4485412400C284142269825200520905
Option 2: 21DD4C85412400C284143269825200520905

[grpolo]

Thank you very much, what would be the difference between option 1 and option 2 ???

Sent from my SM-G935F using Tapatalk

[iichel]

It depends on the exact parameterization of your ABS module. The effect is the same.

[grpolo]

does VCDS provide an explanation for each of those Byte/Bits ? because i see on my OBD11 there is no description what so ever...
Im trying to figure out how to only change the byte 2 and im failing to do so.
And by the way i saw from the XLS that byte 2 44 is for 200mm rear drums so its wrong, i have 232mm discs so it must be changed to (48 - 288mm front discs and 232mm rear discs)

[iichel]

No VCDS does no explanation either. It is up to the enthousiasts to find the pattern.
Yes you found my easter egg, well done. Please try 48 for byte 2 and 12 for byte 10.

21DD4885412400C284141269825200520905

[grpolo]

lol easter egg, imagine i would be on some guys roof if i tried to brake with that coding....

[iichel]

No not really