Is the 6C fromt bumper the same as the 6R GTI?

[mirceaculita]

The bumpers look pretty similar while the prices are everything but that.

Could one buy a standard 6C front bumper and install 6R GTI grills?

[ag69]

do you mean 6C bumper
and put in 6R GTI grills ie bottom left right and center - which are honeycomb?

-- > I have not tried but had seen the grooves and they are different. So they wont fit.

[SRGTD]

do you mean 6C bumper
and put in 6R GTI grills ie bottom left right and center - which are honeycomb?

-- > I have not tried but had seen the grooves and they are different. So they wont fit.

The lower grilles are very different - hopefully the pictures below illustrate the differences.

6R GTI;

CE227C06-DDAA-4DE0-8C28-6F7EBF1F8CFF.jpeg (67.85 KiB) Viewed 571 times

And a standard 6C;

E2C1E860-5A0A-4632-B798-1EBF3E08A4D2.jpeg (144.58 KiB) Viewed 571 times

[iichel]

Your first picture is not a GTI but a standard bumper.

This is a GTI bumper, the resemblance is strong:

[amer6R]

As far as I can see the 6C has vertical mounting clips for the center grill, while 6R GTI like ( 6R) has diagonal
And the holes for the fog lights look identical
I think you could pull it off if you use a zip tie to hold the center grill. Assemble the center one off the car then put it on.

[SRGTD]

Your first picture is not a GTI but a standard bumper.

This is a GTI bumper, the resemblance is strong:

Oops! That’ll teach me to assume that a picture of a Polo with GTI alloys is actually a GTI .

[mirceaculita]

They do seem DYI-able. I think I might upgrade to a 6C front bumper and maybe I'll order some cheap fakes of Aliexpress to test. If this was that easy I feel like most enthusiasts that own a polo would do it so I'm not sure about it.

[amer6R]

Just find a way to secure the center grill, the rest is easy.
You can use a zip tie, or screws.