Aftermarket Steering Pump code HELP!!!

Chat about your 6R/6C model Polos here!
User avatar
ciclo
Bling Bling Diamond Member
Posts: 7829
Joined: Sun Feb 24, 2013 10:20 am
Drives: 6R'13/G7.5'19
Location: Earth ♥, sPAIN, Magiclands (Mordor).
Contact:

Re: Aftermarket Steering Pump code HELP!!!

Post by ciclo »

Once the Steering Assist (44) has been coded with the code '11250' (in your case), you may also have to do the basic setting of steering angle sensor (G85) in the ABS unit (03), which is a different procedure.

VCDS procedure: http://wiki.ross-tech.com/wiki/index.ph ... ic_Setting
Something similar will be for your diagnostic tool.

Keep in mind that it is possible that the faults will disappear once you exit communication with the ABS module and perform a new ignition cycle.
User avatar
ciclo
Bling Bling Diamond Member
Posts: 7829
Joined: Sun Feb 24, 2013 10:20 am
Drives: 6R'13/G7.5'19
Location: Earth ♥, sPAIN, Magiclands (Mordor).
Contact:

Re: Aftermarket Steering Pump code HELP!!!

Post by ciclo »

I just realized that the part number of the pump you installed is not correct:

Image

Must be:
6R0423156C

Image

---
The item 12H0037 'according to Autodoc' should be compatible, but the pump you installed (6Q0423156AB) is installed on previous models (Polo 9N3, Ibiza 6L, ...).

Image
🤷‍♂️
User avatar
iichel
Bling Bling Diamond Member
Posts: 6376
Joined: Fri Nov 14, 2014 2:14 pm
Drives: Polo 6R 2.0 TDI, Passat B8 2.0 TSI
Location: http://mypassat.nl/

Re: Aftermarket Steering Pump code HELP!!!

Post by iichel »

Looks like you're absolutely right ciclo:
Somebody else with the same problem: https://forums.ross-tech.com/index.php? ... ost-124227
I'd suggest to get the right 6R0 C pump

Interesting side facts:
it shows on this PQ25 Ibiza scan: viewtopic.php?t=72356 (ESP, 2011)
2010 Fabia 5J PQ25 (no ESP): https://www.digital-kaos.co.uk/forums/s ... abs-coding
Post Reply