RLS and Autolight Retrofit
-
- New
- Posts: 8
- Joined: Thu Apr 18, 2024 11:03 am
- Drives: Polo 6C 1.0 Litre R Line 110hp
- Location: Glasgow
RLS and Autolight Retrofit
Hi, Im trying to retrofit RLS and Autolight to my car, my bcm is 6C0937089 and software version c. Correct me if im wrong, its my understanding that i need to connect a wire from T10/2 to T73a/43 for the auto function in the rotary switch to function? Its ok to use OE000979009E repair wire for this task, if not could someone point to the connect wire and terminal pins for this task. Thank in advance.
- iichel
- Bling Bling Diamond Member
- Posts: 6407
- Joined: Fri Nov 14, 2014 2:14 pm
- Drives: Polo 6R 2.0 TDI, Passat B8 2.0 TSI
- Location: http://mypassat.nl/
Re: RLS and Autolight Retrofit
You'll need a wire with a micro quadlock system connector and 0,35mm2 or higher diameter. Pin numbers are correct.