Re: Aftermarket Steering Pump code HELP!!!
Posted: Thu Nov 16, 2023 3:34 am
Once the Steering Assist (44) has been coded with the code '11250' (in your case), you may also have to do the basic setting of steering angle sensor (G85) in the ABS unit (03), which is a different procedure.
VCDS procedure: http://wiki.ross-tech.com/wiki/index.ph ... ic_Setting
Something similar will be for your diagnostic tool.
Keep in mind that it is possible that the faults will disappear once you exit communication with the ABS module and perform a new ignition cycle.
VCDS procedure: http://wiki.ross-tech.com/wiki/index.ph ... ic_Setting
Something similar will be for your diagnostic tool.
Keep in mind that it is possible that the faults will disappear once you exit communication with the ABS module and perform a new ignition cycle.