Fresh from the dealership...

Chat about your 9n Polo (inc GT and Fun)
ciden
Bronze Member
Posts: 214
Joined: Sun May 11, 2003 6:21 pm
Location: George, RSA (South Africa)

Post by ciden »

Ok, here's our local (South African) line-up:

1.4 60kW (80bhp) @ 5000rpm - 127Nm @ 3800rpm
1.6 74kW (100bhp) @ 5500rpm - 140Nm @ 3250rpm
1.6 C/line 74kw (100bhp) @ 5500rpm - 140Nm @ 3250rpm
1.4 TDI 55kW (74bhp) @ 4000rpm - 195Nm @ 2200

Driving to Cape Town tomorrow to run my car in - hopefully it'll be a bit more lively when I return :lol:
Mikeyw
Bronze Member
Posts: 165
Joined: Thu Mar 27, 2003 8:46 am
Location: Uxbridge

Post by Mikeyw »

kliis wrote:
Mikeyw wrote:The cars us guys have in the UK are made in Spain. Should I complain to you for the bad quality on my car anyway?? :x

Only joking. :wink:
(Just kidding, don't get angry with me)
I am not angry, just wanna get even now. :twisted:
Babe RuthLess
Gold Member
Posts: 568
Joined: Tue May 06, 2003 6:17 pm
Location: Belo Horizonte, Brasil
Contact:

Post by Babe RuthLess »

Hi.

In Brazil the Polo leaves the assembly line with 1.6- and 2-litre engines with 74kW (101bhp) and 85kW (115bhp). There are 4 trim levels, Basic, Comfortline, Sportline and Highline. There was also a limited edition 'Next' model.

The 1.6 is VW's new 'RSH' engine which replaced the alloy 'SR' unit in 2001 Golfs and now it's used in the Polo too. Despite the cast iron block it's some 20kg lighter than the older 'SR' unit. The RSH is a low-friction engine, mounting roller finger camshafts ('RSH' in German). It's probably the same engine SA Polos have.

1.6 torque is 140Nm at 3250 rpm.

Cheers,
ciden
Bronze Member
Posts: 214
Joined: Sun May 11, 2003 6:21 pm
Location: George, RSA (South Africa)

Post by ciden »

Thanks for that info Ruthless - interesting to know :D
Post Reply