I m thinking of designing and making a performance inlet manifold for the 1.6 16v gti engine, just wana gauge interest as to who would be interested in one if the gains were good enough?
It would only be made if the gains on the prototype were over 10bhp.
The results obviously depend greatly on how much restriction the inlet system has on the engine.
Performance inlet manifold....would this interest any of you
-
psycho sport
- Getting There!
- Posts: 56
- Joined: Fri Feb 10, 2006 7:12 pm
- Location: Berkshire
-
olop_chris
- Sponsor
- Posts: 2131
- Joined: Wed Feb 01, 2006 11:15 pm
- Location: Derbyshire Drives: 270bhp .:R32
- Contact:
-
psycho sport
- Getting There!
- Posts: 56
- Joined: Fri Feb 10, 2006 7:12 pm
- Location: Berkshire
Experiece sod all....
Knowledge, enough to know what needs to be done to achieve results.
I have a couple of people that will be making the actual inlet manifold and they both are very experienced with making inlets etc.
To be honest it may not work but if it does i ll let the results do the talking!
Knowledge, enough to know what needs to be done to achieve results.
I have a couple of people that will be making the actual inlet manifold and they both are very experienced with making inlets etc.
To be honest it may not work but if it does i ll let the results do the talking!
-
psycho sport
- Getting There!
- Posts: 56
- Joined: Fri Feb 10, 2006 7:12 pm
- Location: Berkshire
-
psycho sport
- Getting There!
- Posts: 56
- Joined: Fri Feb 10, 2006 7:12 pm
- Location: Berkshire