Over the past year ive replaced...
2 x Front Wishbones
Suspension all round (standard), and top mounts
Complete exhaust
Brake Pipes
Wheel Bearings
Cylinder Head Gasket
Timing Belt
Water Pump
Anyways.... after I got it running mechanically smooth (Sitting at 126k and it runs as smooth as my first polo which had 60k on it!!), I decided to start getting the bodywork in order.
Travelled down to Lincoln, got myself a 16v interior and an Rieger RS4 Bodykit (which I decided later I didnt like!!!).
Anyways...... Heres what the car looks like so far, a selection of photos on its progress.
What do you think???
![Razz :P](./images/smilies/icon_razz.gif)
![Image](http://www.hawjimmy.org.uk/pic01.jpg)
Polo back in April 2006 when I first bought it
![Image](http://www.hawjimmy.org.uk/pic02.jpg)
Smoked Lights added all round
![Image](http://www.hawjimmy.org.uk/pic03.jpg)
Lowered 40mm
![Image](http://www.hawjimmy.org.uk/pic04.jpg)
Test fitting of Spoiler
![Image](http://www.hawjimmy.org.uk/pic05.jpg)
Stripped down, and partially rubbed down prior to respray
![Image](http://www.hawjimmy.org.uk/pic06.jpg)
Work In Progress
![Image](http://www.hawjimmy.org.uk/pic07.jpg)
Roof in Primer
![Image](http://www.hawjimmy.org.uk/pic08.jpg)
Finished Article - Front
![Image](http://www.hawjimmy.org.uk/pic09.jpg)
Finished Article - Rear
Bodykit is a Rieger RS3...... on the lookout for some new alloys for it, as these ones look out of place
![Razz :P](./images/smilies/icon_razz.gif)