Hello,
I retrofited my park pilot 4k to 8k, oem, except for the front radars that i bought on ali.
I coded all, but i 've got a problem, when engine is on, front radars beep continually, when i stop the engine with contact on it's ok.
I don't understand why, front radars are painted, Polo 6c got abs and esc and i installed the pdc button.
Any idea ? coding seems to be ok. Other, my wiring come from passenger hole, so the the left and right sensor are inverted on OPS, is it possible to swap it by coding ?
Thanks !
Retrofit park pilot 8k problem
Retrofit park pilot 8k problem
- Attachments
-
- radar not ok -.jpg (247.79 KiB) Viewed 1939 times
-
- radar ok -.jpg (249.05 KiB) Viewed 1939 times
- iichel
- Bling Bling Diamond Member
- Posts: 6375
- Joined: Fri Nov 14, 2014 2:14 pm
- Drives: Polo 6R 2.0 TDI, Passat B8 2.0 TSI
- Location: http://mypassat.nl/
Re: Retrofit park pilot 8k problem
No you can't swap left and right but perhaps you can switch the cables either in the module or in the coupling point to the rear bumper.
Is your kit OEM or ali OEM?
Is your kit OEM or ali OEM?
Re: Retrofit park pilot 8k problem
Oem kit from carsystem, it.s a good idea for coupling point from rear bumper, must found diagram.
Other an idea about my problem ?
Other an idea about my problem ?
- Attachments
-
- Code 1.jpg (316.08 KiB) Viewed 1870 times
-
- Code 2.jpg (324.03 KiB) Viewed 1870 times
-
- Code 3.jpg (97.81 KiB) Viewed 1871 times
- ciclo
- Bling Bling Diamond Member
- Posts: 7829
- Joined: Sun Feb 24, 2013 10:20 am
- Drives: 6R'13/G7.5'19
- Location: Earth ♥, sPAIN, Magiclands (Mordor).
- Contact:
Re: Retrofit park pilot 8k problem
I did something similar on my 6R viewtopic.php?p=538024#p538024
WD Polo 6C PDF https://drive.google.com/file/d/0B2nv91 ... Fo9JXQYHxw
WD Polo 6C PDF https://drive.google.com/file/d/0B2nv91 ... Fo9JXQYHxw
Re: Retrofit park pilot 8k problem
Hello,
Thanks ! I will have a look
Thanks ! I will have a look
Re: Retrofit park pilot 8k problem
I fix my problem with new originals sensors.
On carplay, when pdc is on, the screen become black, do you have same thing ? Or i need a new coding ?
On radio or gps no black screen.
On carplay, when pdc is on, the screen become black, do you have same thing ? Or i need a new coding ?
On radio or gps no black screen.
- Attachments
-
- IMG_0380.jpeg (2.32 MiB) Viewed 1657 times