UK-POLOS.NET - THE VW Polo Forum

thank u for the suggestion I like it.
I'm just a bit worried heat may compromise the glue . this roofs are not so good. I was thinking to try first by adding something behind the crack to increase the tension. what do you think mate?

Absolutely right Fernando :) Today I changed roof aerial. It was a nightmare. I followed Elsawin instructions but even If I was very carefull the roof had been a little damaged maybe because it's old and no more elastic as one time.. see last picture. Any idea how to fix it? :( https://i.postimg.cc/...

Installing VW radio microphone

In this case the very nice conversion of your windshield to RLS/dimming mirror mount. Thank you very much Michael! That was possible only thanks to many informations you and ciclo provided on this forum. :D The wire that feeds 12V to your dimmer (T6aa/3) needs to receive its power from the BCM. (.....

Can I just say I'm very impressed? Because of what mate? :wink: RLS coding 028877 -> 0228DD --> 77 to DD is the correction index for your windshield. BCM byte 23 bit 0 will activate the output of T73b/4 for terminal 58 (wire to your dimmer) IIRC for your BCM 7E0 Thank you for explanation Michael. :...

Thanks for the explanation Fernando!
Yes, it has much sense.

BCM
New coding:
Enable Byte23 Bit 0.

RLS
New coding:
0228DD

Thank you for the coding, Fernando.
What do these change?

Thank you Fernando! :D Today I've added automatic light wiring harness (thank you very much Fernando for your wiring diagram). https://i.postimg.cc/kVy7xSB1/IMG-3360.jpg https://i.postimg.cc/G4wRVKDg/3-KBa-O-YHSEG1qe-YEu-BUz-UA.jpg https://i.postimg.cc/4mhZWqYh/0-4-UOTn1-RG2-PXVDFEjp3-OA.jpg Everyth...

Hi Fernando, Roman told me the emulator worked fine on an other Polo with same engine and BCM max installed so we really don't understand what the issue is. Further investigation is needed. I've to get a can hack from somewhere and report to Roman CAN's data. Now, as I anticipated here are some pict...

Thank you very much Fermando.

I previously used can wires from stalk and I had same result. Do you will be any differences using old can wires of IC connector (ex t32/28 & ex t32/29) instead of can wires from stalk? They should be connected so I do not know if it may help.

Thanks

Roman said:

try to connect to the wires Can bus about amplifier helm

What does it mean guys?

Hi guys, I connected GRA emulator to the other CAN wires from IC connector.

Nothing changed.

Video:
https://youtu.be/L36DUdzPozg

Wirings:
https://i.postimg.cc/YCSNJqxL/wiring1.png
https://i.postimg.cc/Cx6CYTvP/wiring2.jpg

Thank you for you answer Fernando. :) When car is running and I press SET button CC works fine but on the bottom left It's only diaplayed 0 km/h. I'm getting confused for which CAN line use. Roman (emulator programmer) told me the connection must be established to Can Powertrain. I have just asked f...

In a couple of months I will be testing these LED lamps for the SCLs, at the end of August I have the ITV (MOT). :mrgreen: Great, thanks! :D Today I managed to install GRA High emulator but for some reasons GRA speed is stuck at 0 km/h. I connected emulator wires to CAN powertrain (old CAN) as It w...

Perhaps some bad wiring or a defective sensor Problem was caused by a detached wire. Now It works like a charm. 8) I have not installed them yet, I cannot 100% affirm anything I'm sure you will post results on your topic. I'm very curious to see the result. :D :mrgreen: And now... from Russia with ...

Thank you for the pictures those lamps looks great. :D How do you think to mount them on H7 socket? Is there an adaptor? Is there enought space for central unit inside the headlight to not modify the cap? I'd really like to install leds but I'm worried about possible issue with italian laws. :| with...