UK-POLOS.NET - THE VW Polo Forum

On your first post, you have two pictures. One of the car with mfsw buttons only on the left side. Is this picture from your car? If yes can you post the code from those buttons and the code for the airbag wire that came with your car?

Sent from my Mi Note 10 Pro using Tapatalk

Hi Navein I have limited knowledge on the matter but here is what I know. If your car is PQ25 electronics the steering wheel you got won't work. You need the equivalent from Skoda Superb 2 FL, Fabia 2 FL, Yeti etc https://www.cars-equipment.com/en/shop/flat-bottom-steering-wheels-12/ The steering lo...

Do the Golf bumpers have indications on where to drill for the PLA sensors, or you have to make them on your own?

Sent from my Mi Note 10 Pro using Tapatalk

Forgot you getting a new car with the steering, I don't need to say something more. You will see for yourself :) I recently got a passat gte from the local dealer, a car that they had preconfigured and sell with discount. The car has electric mirrors with manual fold and potlights, but the mirror do...

Good morning ciclo. Yes you are right probably ppl will get used to the capacitive buttons. But me I like the texture and the difference levels that physical buttons provide, so I don't need to look where I press and wait for some vibration mechanism to give feedback. Time would tell :) I have seen ...

Enjoy the process ciclo. I know that the result will satisfy you. My current vw is missing both blind spot monitoring and folding mirrors and is super inconvenient for me. With a glimpse you can see if your car is locked and the blind spot had saved my bacon a few times the last 3 years. Now the que...

Nice upgrade, you keep the knobes and you have have almost same functionality like discovery Pro.

What about component protection? Will VW dealer will fix this for you?

Sent from my Mi Note 10 Pro using Tapatalk

My car doesn't have a start/stop system and has 086 BCM.

So should tap the two cables on the T32 plug.

@iichel When retrofitting the steering angle sensor, which is the best/safer location to tap the wirers for the CAN bus signal? For example tapping the two wires that go to the OBD2 port a few cm before the connector, is it a good solution or it wont work. Is there a better location you would recomm...

There is an adaptor box that you can install in your car and I think will have crouse control buttons from the steering wheel work.

Check @ciclo thread on his 6R. On his last posts he might have more info

Sent from my Mi Note 10 Pro using Tapatalk

Did you swap only front seats or back raw also?

Sent from my Mi Note 10 Pro using Tapatalk

Do all 6R come with min 086 BCM?

Sent from my MI 5 using Tapatalk

My car came from factory without ESP, so I have ABS8.2 and slip ring without steering angle position sensor. If I upgrade the slip ring to one for ESP car (provided I installed the extra wires needed) will it work without errors if I don't upgrade the to an ESP pump? I am interested to retrofit stat...

Thanks for your answer @Ciclo I am asking because I am just curious and not question your solution. At least on Fabia and in theory, the number plate lights and reverse light, should continue function when upgrading to BCM Max without cable changes. You will get error codes of course and owner shoul...

4 https://i.imgur.com/9fIYUBZ.jpg Plate lights. Before and After. Before (your current installation) https://i.imgur.com/RZxhlmm.jpg After https://i.imgur.com/Qpjw4Cn.jpg -Remove the panels that are necessary to run the wire next/parallel to the original harness. -Cut the indicated wires near the l...