UK-POLOS.NET - THE VW Polo Forum

Golf 7.5 DCC project. Wiring from engine compartment to TIUL. I removed the battery and battery tray to have better access, and as on other occasions, I use a guide wire to pass the wiring through the grommet. https://i.imgur.com/jkt1pX6.jpeg https://i.imgur.com/j5Wb0HH.jpeg https://i.imgur.com/ICE...

---



🎗
https://www.youtube.com/watch?v=dgf5QlcyTFY

Golf 7.5 DCC Project. Installation of the wiring section in the Plenum chamber area and front body acceleration senders. https://i.imgur.com/9g7YRal.jpeg Video :arrow: :arrow: :arrow: https://www.youtube.com/embed/XNuv3lBeyy8?rel=0&autoplay=1 Previous info: https://uk-polos.net/viewtopic.php?p=...

Today I happily headed to the middle of nowhere to install the original wiring harnesses for the rear shocks/wheels/parking brakes of my DCC project, but the weather conditions were not conducive to doing any work under the car. https://i.imgur.com/h7mxquZ.jpeg What a fun photo... :lol: Once in the ...

Golf 7.5 DCC Project. Installation of the DCC unit and wiring harnesses from the DCC unit to TIUL. The most likely part of the DCC unit retainer to make annoying noises is the lower release tab/lug. To me it is very obvious, so I proceed to install more felt. https://i.imgur.com/E8R4fT5.jpeg There ...

Tomorrow, or when possible according to weather forecasts, showers along with haze/mist (desert dust) are approaching.

Little by little (step by step), you will surely find the right hoses for that place.

I have to admit that it is the best DIY image I have seen in a long time.

Golf 7.5 DCC Project. Installing the rear left body acceleration sender rivet nut. I remove the necessary parts according to erWin (trims, etc), except that I do not remove the left luggage compartment side trim completely since it is possible to remove it from the retaining ring for the rear seat ...

Golf 7.5 DCC Project. DCC unit retainer. Felt strip. https://i.imgur.com/J04cj5A.jpeg 🤔 Let's do an online search... https://i.imgur.com/qCoESTv.jpeg ...in the images of the second-hand parts it is obvious that the felt strip/s is necessary for a correct fit of the DCC unit retainer. I suppose to a...

Test. Adapter for nut riveter (drill). NRA-M06. Video . https://i.imgur.com/cv3i0ob.jpeg In order to install the rear body acceleration sender (G343) of my DCC project, it is necessary to install a rivet nut (M6) in the hole already made in the body. Some time ago I bought an Adapter for this type ...

Tool to remove VW connectors. Video. https://i.imgur.com/qMw9G31.jpeg Normally, VW connectors are easy to remove with a simple screwdriver, but depending on the location of the connector, sometimes it is impossible to use a screwdriver to remove some VW connectors, and other times the connector is ...

WD POLO 6C
https://drive.google.com/file/d/0B2nv91 ... Fo9JXQYHxw

I'm glad to know that everything went well.👌 If I saw an elephant on the side of the road where I live, I would either be dreaming or I would die of fear...😄 I have to say that in the place where I live there is also wildlife transit on the roads, but of medium or small size, such as deer, wild boar...

From the color of the wires and the information provided, it seems like a job related to the infotainment and 'telephony' system, although it could be anything... From the appearance of what is shown, it does not seem like a normal or relatively acceptable botch 🤭, it is a real botch with 0.3 % spen...