CheersTim_GTi wrote:CymruPolo wrote: What does cleaning the throttle body do? How is it done, and how do you know if it needs cleaning?
Alun, take the cover off the engine,
followed by the airbox, and you'll see it!!!
clean it out using a cloth, then start the car and get someone to rev it.
the butterfly will open, which is when you spray inside using carb cleaner
carb cleaners a bottle you can buy from halfords for bout £6.
http://www.tigerstyle.co.uk/poloforum/v ... &start=210
theres pics there of when mouse did his. Sure theres some more info throughtout the GTi section too though
Rolling Road Prep
http://www.bebo.com/FlashBox.jsp?FlashB ... 3905082427
On the RR.
I had this squeeek that u can hear - i tryed fixing it but had no luck. 2day i managed to find the problem - ive lost 2 bolts from my BBS wheels !!!!
On the RR.
I had this squeeek that u can hear - i tryed fixing it but had no luck. 2day i managed to find the problem - ive lost 2 bolts from my BBS wheels !!!!
- alexperkins
- Site Admin
- Posts: 14873
- Joined: Sat Nov 11, 2006 5:29 pm
- Drives: 91 Golf GTI, 01 TT 225, 54 T5 174
- Location: Poole, Dorset, UK.
- Contact:
- alexperkins
- Site Admin
- Posts: 14873
- Joined: Sat Nov 11, 2006 5:29 pm
- Drives: 91 Golf GTI, 01 TT 225, 54 T5 174
- Location: Poole, Dorset, UK.
- Contact:
Bolt them to a wall or valium perhaps? hehe
£5 including postage for the bolts sound kl?
PM me your house address and ill send over the paypal details
Here you go!
[Select]
[55 - Xenon Range]
[Basic Settings - 04]
Group 001
[Go!]
Wait at least 20 seconds for the headlamp motors to move.
Scroll up to Group 002. The Xenon Range controller has now learned this position as its Home position.
Click the [Done, Go Back] button and you're all set.
£5 including postage for the bolts sound kl?
PM me your house address and ill send over the paypal details
Here you go!
[Select]
[55 - Xenon Range]
[Basic Settings - 04]
Group 001
[Go!]
Wait at least 20 seconds for the headlamp motors to move.
Scroll up to Group 002. The Xenon Range controller has now learned this position as its Home position.
Click the [Done, Go Back] button and you're all set.
-
RICHARD HARPER
- Bronze Member
- Posts: 241
- Joined: Wed Oct 06, 2004 12:04 pm
- Location: Portlethen Aberdeen Scotland
- Contact:
-
RICHARD HARPER
- Bronze Member
- Posts: 241
- Joined: Wed Oct 06, 2004 12:04 pm
- Location: Portlethen Aberdeen Scotland
- Contact:
Re: Rolling Road Prep
Mouse_GTI wrote:Hey guys, getting my car rolling roaded in a week for the first time, should be interesting to see how much it is putting out with just the BMC. Any preperations other than checking the BMC connections, tyres pumped up?
Remember to check all fluid levels and fill with V Power (Dunno if it makes much difference but i used it anyway)
And then post up results
-
RICHARD HARPER
- Bronze Member
- Posts: 241
- Joined: Wed Oct 06, 2004 12:04 pm
- Location: Portlethen Aberdeen Scotland
- Contact:













