I did isolate original T73a/45 wire, I forgot to mention that, T73a/45 is a new wire and it goes together with old T17/16 and T73b/7 - is that correct ?
Just to be sure I have not messed up with wires, according to schemes T6 plug for dimmer should have 58d signal on pin5 and it is the same signal that goes to T10/10 ( old T17/17) - checked by multimeter
Maybe I miss understood your scheme
My invention with that relay was only way to make van legal and drivable
![Crying or Very sad :cry:](./images/smilies/icon_cry.gif)
Another thing I noticed with T73b/7 when main beam is off there is no current on that wire, but ince I will switch on main beam there is 12v and after switching them off again its not going to 0v, there is all the time 12v untill battery goes flat or untill I disconnect battery myself
Should it be like that ?
At least T6 dashboard and all rewiring went smooth
There is a TIP for someone who wants to do the same:
T5.1 instrument cluster and T6 are the same, just different housing, so if you have highline cluster just get a T6 housing and swap interior - save you some money