Re: POLO 6R. HEATED SEATS. OEM.
Posted: Wed Jun 15, 2022 2:58 pm
I think for <200 eur you could source OEM installation except the pads from a used car.
- 2022-06-01 17.39.00.jpg (811.26 KiB) Viewed 2319 times
UK-POLOS.NET - THE VW Polo Forum
Probably the Worlds greatest Polo resource
https://uk-polos.net/
POLO 6R. HEATED SEATS. OEM.
Page 13 of 15
Re: POLO 6R. HEATED SEATS. OEM.
Posted: Wed Jun 15, 2022 4:04 pm
Easily. I have a new harness and used OEM buttons + module for Polo 6R for sale for 145.
Re: POLO 6R. HEATED SEATS. OEM.
Posted: Sat Jun 18, 2022 9:35 pm
Yes, everything is provided with the kit. I have bought it from the same store you have linked.mirceaculita wrote: ↑Wed Jun 15, 2022 2:54 pmDid they provide everything needed for the install? Also do you still have the link from who you bought it?
Re: POLO 6R. HEATED SEATS. OEM.
Posted: Mon Sep 12, 2022 2:01 pm
did the aliexpress kit require coding of any sort or was a plug and play please ?
Re: POLO 6R. HEATED SEATS. OEM.
Posted: Wed Sep 21, 2022 11:52 am
This is what I recieved almost 2 years ago.
I installed the week i got it, I haven't had issues so far.
You might need to code your BCM, otherwise adding the female end for the fuse is the trickiest bit.
I believe the pads (made by Gentherm the same OEM as the 6R0 pads) are from a China/east asia only model, the Santana.
Imgur album: https://imgur.com/a/nJYRkMm
I installed the week i got it, I haven't had issues so far.
You might need to code your BCM, otherwise adding the female end for the fuse is the trickiest bit.
I believe the pads (made by Gentherm the same OEM as the 6R0 pads) are from a China/east asia only model, the Santana.
Imgur album: https://imgur.com/a/nJYRkMm
Re: POLO 6R. HEATED SEATS. OEM.
Posted: Tue Apr 18, 2023 11:26 pm
Did you ever have any luck?CANDYMAN wrote: ↑Fri Dec 03, 2021 3:51 pm Sorry for re-igniting this post could someone tell me what these plugs are. I’m guessing the yellow is airbag, Green seat sensor for seatbelt warning? But what are the 2 white ones. Are they both for the heated seat. If so which is the Base and which is the Backrest. If looking from the front of the seat. My heated seat has packed up so I’m looking for help on how to determine which pad has failed. If I turn the seat heat on with 2 lights it shuts down after around 30 seconds. If I turn them on with one light it stays on. HEEEEEEeeeelp
Anyone else able to comment?
Re: POLO 6R. HEATED SEATS. OEM.
Posted: Wed Sep 06, 2023 12:38 am
Where does the burgundy seat heating pad plug go to? Do you need to change the connector to match up with the one on the loom? I take it the blue one in my photos is the seat occupancy one?Thanos wrote: ↑Wed Sep 21, 2022 11:52 am This is what I recieved almost 2 years ago.
I installed the week i got it, I haven't had issues so far.
You might need to code your BCM, otherwise adding the female end for the fuse is the trickiest bit.
I believe the pads (made by Gentherm the same OEM as the 6R0 pads) are from a China/east asia only model, the Santana.
Imgur album: https://imgur.com/a/nJYRkMm
Re: POLO 6R. HEATED SEATS. OEM.
Posted: Wed Sep 06, 2023 9:11 am
The burgundy connector connects to the wiring loom.
Mine is not linked to the seat it just dangles underneath the seat.
Mine is not linked to the seat it just dangles underneath the seat.
Re: POLO 6R. HEATED SEATS. OEM.
Posted: Wed Sep 06, 2023 9:21 am
The Kufatec wiring loom doesn't have a burgundy matching connector like that-it has a male 1J0972923 -it's the same as the photo that iichel posted
Re: POLO 6R. HEATED SEATS. OEM.
Posted: Wed Sep 06, 2023 9:31 am
This is the loom I have:
https://www.kufatec.com/en/volkswagen/v ... o-6r-40013
https://www.kufatec.com/en/volkswagen/v ... o-6r-40013
Re: POLO 6R. HEATED SEATS. OEM.
Posted: Mon Sep 18, 2023 9:12 pm
Hi Guys 
i drive a Seat Ibiza 6J SC 2015
Buyed a 6R0959772A Modul and also buyed the kufatec cable kit.
6J0927137AP as switch - 6R0937087R as bcm
I have wired everything correctly - I have plugged in the fuse.
After that i coded byte 15 bit 4 to 1.
I have about 10v at the plug.
When i press the button - nothing happend.
The seat mats are still on the way - i cant test it with the mats on :/
When i want to access "channel 63" -> it says "The channel is not available"
Is everything OK so far?
Thank you for your help
br Zun
i drive a Seat Ibiza 6J SC 2015
Buyed a 6R0959772A Modul and also buyed the kufatec cable kit.
6J0927137AP as switch - 6R0937087R as bcm
I have wired everything correctly - I have plugged in the fuse.
After that i coded byte 15 bit 4 to 1.
I have about 10v at the plug.
When i press the button - nothing happend.
The seat mats are still on the way - i cant test it with the mats on :/
When i want to access "channel 63" -> it says "The channel is not available"
Is everything OK so far?
Thank you for your help
br Zun
Re: POLO 6R. HEATED SEATS. OEM.
Posted: Mon Sep 18, 2023 9:24 pm
is the engine running when you test?
Re: POLO 6R. HEATED SEATS. OEM.
Posted: Mon Sep 18, 2023 9:34 pm
No the engine wasnt running.
The key was on "Ignition" position.
The key was on "Ignition" position.
Re: POLO 6R. HEATED SEATS. OEM.
Posted: Tue Sep 19, 2023 8:41 am
then the seat heating will not turn on, engine must be running of you let the BCM control it.
Re: POLO 6R. HEATED SEATS. OEM.
Posted: Tue Sep 19, 2023 5:26 pm
When I started the engine - there is 11.8v at the plug.
When the engine is running - 12.7v at the plug - the switch does not light.
Did he need the 2.4 ohm resistance from the seat heating to illuminate control leds?
When the engine is running - 12.7v at the plug - the switch does not light.
Did he need the 2.4 ohm resistance from the seat heating to illuminate control leds?