BCM Max Transporter 2013

[iichel]

post a vcds autoscan please to see what's happening

[LaurentiuL]

Hello, cilco how can i get in touch with you, i want to ask you something and i cannot send you a pm. Thx.

[ciclo]

Hi welcome.
Start here...

[Shadow109]

So I have finally completed my EPB retrofit

42752F17-E814-4DD9-B46B-A90E3C8197E5.jpeg (354.88 KiB) Viewed 4111 times

I had this kit from e-bay that have nearly everything I want

Attached the new button:-

89517D4C-DDB7-4467-BEDB-BCA89602B4EE.jpeg (4.62 MiB) Viewed 4111 times

E33EB42D-0ED6-4B3A-9AE9-F6C5C3E707D8.jpeg (3.41 MiB) Viewed 4111 times

Replaced the calipers:-

3A836D4F-E51A-4AAB-AEA1-9D20852CE05D.jpeg (3.37 MiB) Viewed 4111 times

Everything works as expected

Part Two was dealing with parking signal to cluster

First I have modified my secondary cluster

7A34CA7B-5875-464D-972F-2F537D6FD9ED.jpeg (866.73 KiB) Viewed 4111 times

4679CB8F-6266-442B-A1D7-0B11F9C938F7.jpeg (713.87 KiB) Viewed 4111 times

After that I have edited epprom with VDO editor

But after testing the signal is reversed
So I have P light on when parking break is not engaged
When I have a free time I will try to sort it out

[Shadow109]

No progress on retrofitting the 2Q0 radars,
But I had succeeded to add cool feature to my 5Q0 radars
Rear traffic alert warning on Cluster :-

[youtube]https://youtu.be/2JTT2LMBan4[/youtube]

[prtvrk]

No progress on retrofitting the 2Q0 radars,
But I had succeeded to add cool feature to my 5Q0 radars
Rear traffic alert warning on Cluster :-

[youtube]https://youtu.be/2JTT2LMBan4[/youtube]

How? I'm missing that

[Shadow109]

I don’t really know yet, send me your coding to check it

[prtvrk]

I don’t really know yet, send me your coding to check it

Cluster, parking assist and blind spot?

[Shadow109]

parking assist and blind spot

[prtvrk]

parking assist and blind spot

Parking assist:
1K8919475D
LC: 00 31 16 72 51

Blind Spot
2Q0907686B
LC: 52 94 A4 20

[prtvrk]

@shadow109, i can't reply to your PM as a new user. Can I send you an email?

[Shadow109]

this is a small present for everyone in this forum, the data in this file was collected VCDS (German), and from this furom

https://www.dropbox.com/s/2jfabdoz2u1ir ... 1.clb?dl=0

[ciclo]

Byte29 Bit5 is active when LED headlight "modules" (PQ25) are installed. (in case someone wants to correct that label)

[Shadow109]

Sure, I will correct it, big thanks

[Shadow109]

New project on the way :-

313CE1C1-D194-4DA3-80B6-A8448F9FEDCC.jpeg (2.77 MiB) Viewed 3619 times

The cluster, key, and elv is form the same, this will make it possible to adapt elv through vvdi2

6A575CCF-A050-4192-A93C-02F6FEDA14D1.jpeg (4.58 MiB) Viewed 3617 times

I am not starting this project until finishing DCC

after trying to bought used shock absorbers, I have discovered that my country rules had forbidden buying used shock absorbers, so I had to change the plane and buy new ones

After checking etka I found out I can use t6.1 rear shock absorbers which is cool