Good work!
BCM Max Transporter 2013
-
Maarten
- Gold Member
- Posts: 557
- Joined: Tue Aug 11, 2015 9:45 am
- Drives: 2024 VW T-ROC R-line 1.5TSI Lapiz Blue
- Location: The Netherlands
Re: BCM Max Transporter 2013
Dashcam startsound in the vid lol :
Good work!
Good work!
-
ciclo
- Bling Bling Diamond Member
- Posts: 8834
- Joined: Sun Feb 24, 2013 10:20 am
- Drives: 6R'13/G7.5'19
- Location: Earth ♥, Spain.
- Contact:
Re: BCM Max Transporter 2013
Hi Shadow109, sorry again for my intrusion 
, please, when possible, can you share with me the hexadecimal values of the following addresses from the EEPROM of your 3D Instrument Cluster (sw1109)?
02DB
02F6
0454
All three addresses fit in one screenshot, to be sure and not make mistakes when copying them manually.
I'm struggling with the EEPROM of my non-3D IC (sw805) for something that maybe/I think doesn't make sense, but I have to rule out all possible options for RTA beep on IC.
Thanks a lot!!!
---
Hopefully you will achieve your future goals with that new 'special steering rack', lane Assist is an important project.
, please, when possible, can you share with me the hexadecimal values of the following addresses from the EEPROM of your 3D Instrument Cluster (sw1109)?02DB
02F6
0454
All three addresses fit in one screenshot, to be sure and not make mistakes when copying them manually.
I'm struggling with the EEPROM of my non-3D IC (sw805) for something that maybe/I think doesn't make sense, but I have to rule out all possible options for RTA beep on IC.
Thanks a lot!!!
---
Hopefully you will achieve your future goals with that new 'special steering rack', lane Assist is an important project.
-
Shadow109
- Bronze Member
- Posts: 152
- Joined: Sun Aug 16, 2020 2:59 pm
- Drives: Vw t5.1 2013
- Location: Israel
Re: BCM Max Transporter 2013
02DB : A7
02F6 : 98
0454 : 14
But from my experience with 3D clusters
Values may be different between 3D and normal clusters
I have suffered to fined the correct values for front assist and side assist
02F6 : 98
0454 : 14
But from my experience with 3D clusters
Values may be different between 3D and normal clusters
I have suffered to fined the correct values for front assist and side assist
-
ciclo
- Bling Bling Diamond Member
- Posts: 8834
- Joined: Sun Feb 24, 2013 10:20 am
- Drives: 6R'13/G7.5'19
- Location: Earth ♥, Spain.
- Contact:
Re: BCM Max Transporter 2013
Perfect, thanks a lot.
Here are the values for:
- Non-3D clusters Amarok_SW1009 (6R0920870B, 6R0920870E).
02DB : AE
02F6 : 98
0454 : 13
- Non-3D cluster POLO6R_SW805 (6RD920870A). My 6R:
Ori:
02DB : 80
02F6 : 18
0454 : 10
After vagmm007 update for Side Assist (guided function):
02DB : AF
02F6 : 98
0454 : 13
With the original 805 sw of my non-3D IC, the BSD and RTA menus are present when connecting the radars for Lane Change... and they work perfectly if the other parts/codings allow it. Also after the update.
---
PQ25:
TR_1109/AM_1009/6R_805OE/6R_805mm
02DB... A7AE80AF
02F6... 98981898
0454... 14131013
To compare the binary (easily with NE-tech).
Here are the values for:
- Non-3D clusters Amarok_SW1009 (6R0920870B, 6R0920870E).
02DB : AE
02F6 : 98
0454 : 13
- Non-3D cluster POLO6R_SW805 (6RD920870A). My 6R:
Ori:
02DB : 80
02F6 : 18
0454 : 10
After vagmm007 update for Side Assist (guided function):
02DB : AF
02F6 : 98
0454 : 13
With the original 805 sw of my non-3D IC, the BSD and RTA menus are present when connecting the radars for Lane Change... and they work perfectly if the other parts/codings allow it. Also after the update.
---
PQ25:
TR_1109/AM_1009/6R_805OE/6R_805mm
02DB... A7AE80AF
02F6... 98981898
0454... 14131013
To compare the binary (easily with NE-tech).
-
Shadow109
- Bronze Member
- Posts: 152
- Joined: Sun Aug 16, 2020 2:59 pm
- Drives: Vw t5.1 2013
- Location: Israel
Re: BCM Max Transporter 2013
Congrats Fernando
I think I don’t have this menu here
Do you know what is the exact eeropm coding for it ?
- IMG_3466.jpeg (816.38 KiB) Viewed 4901 times
Do you know what is the exact eeropm coding for it ?
-
ciclo
- Bling Bling Diamond Member
- Posts: 8834
- Joined: Sun Feb 24, 2013 10:20 am
- Drives: 6R'13/G7.5'19
- Location: Earth ♥, Spain.
- Contact:
Re: BCM Max Transporter 2013
Thank you very much! Side Assist is a very good assistant.
At first I thought it was even unnecessary or that it didn't add much to driving, now I miss it every time I drive a vehicle that doesn't have it.
I'm really happy to have done this project on my 6R.
With the original sw 805 of my IC the BSD activation in the Settings menu is present from the factory, as well as in the Assistants menu.
(see my previous post here for the values of the known eeprom addresses).
There is some eeprom address related to Side Assist that we all miss (I refer to the study in the Excel file that is on the net).
However, if you have the VAGmm007 (or similar -Iscancar-) you can do this
viewtopic.php?p=604597#p604597
I did this and 'everything' continued to work just as well as with the previous eeprom values.
Many more eeprom addresses are modified than those already known, so first do a reading/backup of the IC eeprom with the current values, but you already knew that.
Side Assist is a very good assistant.At first I thought it was even unnecessary or that it didn't add much to driving, now I miss it every time I drive a vehicle that doesn't have it.
I'm really happy to have done this project on my 6R.
With the original sw 805 of my IC the BSD activation in the Settings menu is present from the factory, as well as in the Assistants menu.
(see my previous post here for the values of the known eeprom addresses).
There is some eeprom address related to Side Assist that we all miss (I refer to the study in the Excel file that is on the net).
However, if you have the VAGmm007 (or similar -Iscancar-) you can do this
viewtopic.php?p=604597#p604597I did this and 'everything' continued to work just as well as with the previous eeprom values.
Many more eeprom addresses are modified than those already known, so first do a reading/backup of the IC eeprom with the current values, but you already knew that.
-
ciclo
- Bling Bling Diamond Member
- Posts: 8834
- Joined: Sun Feb 24, 2013 10:20 am
- Drives: 6R'13/G7.5'19
- Location: Earth ♥, Spain.
- Contact:
Re: BCM Max Transporter 2013
Hi Abdullah.
Today I had a session editing the EEPROM of my IC...
... and thinking about your concerns, I also tried the hexadecimal values of the EEPROM addresses of your IC on my IC...
02DB : A7
02F6 : 98
0454 : 14
... and the Assistants/BSD function/option in the SETTINGS menu was always there, as well as in the ASSISTANTS menu.
So you can safely ignore these addresses if you go looking for it.
I was thinking that maybe this option/function is not shown in your IC because you currently have the 2Q0 radars installed instead of 5Q0 and the HMI MIB...
However, the really important thing is that the BSD is shown in the ASSISTANTS menu so you can access it at any time.
I wouldn't worry too much about not having it in the SETTINGS menu.
Today I had a session editing the EEPROM of my IC...
... and thinking about your concerns, I also tried the hexadecimal values of the EEPROM addresses of your IC on my IC...
02DB : A7
02F6 : 98
0454 : 14
... and the Assistants/BSD function/option in the SETTINGS menu was always there, as well as in the ASSISTANTS menu.
So you can safely ignore these addresses if you go looking for it.
I was thinking that maybe this option/function is not shown in your IC because you currently have the 2Q0 radars installed instead of 5Q0 and the HMI MIB...
However, the really important thing is that the BSD is shown in the ASSISTANTS menu so you can access it at any time.
I wouldn't worry too much about not having it in the SETTINGS menu.
-
Shadow109
- Bronze Member
- Posts: 152
- Joined: Sun Aug 16, 2020 2:59 pm
- Drives: Vw t5.1 2013
- Location: Israel
Re: BCM Max Transporter 2013
Thank you for checking, yes maybe, anyway I have also the menu in 5f activated for lane assist
-
Shadow109
- Bronze Member
- Posts: 152
- Joined: Sun Aug 16, 2020 2:59 pm
- Drives: Vw t5.1 2013
- Location: Israel
Re: BCM Max Transporter 2013
New retrofit : T6.1 LED taillights ....
https://youtu.be/8b7QXltOi_4
https://youtube.com/shorts/iTqjvpRbDIE?feature=share
and renewing the led front fog lights :-
the new version won't trigger any fault codes
also the new taillights didn't trigger any faults in 09
https://youtu.be/8b7QXltOi_4
https://youtube.com/shorts/iTqjvpRbDIE?feature=share
and renewing the led front fog lights :-
- WhatsApp Image 2024-09-18 at 19.27.28_a781b059.jpg (213.13 KiB) Viewed 4277 times
- WhatsApp Image 2024-09-18 at 19.27.28_7feb75db.jpg (203.55 KiB) Viewed 4277 times
- WhatsApp Image 2024-09-18 at 19.27.28_6b2f9539.jpg (255.02 KiB) Viewed 4277 times
- WhatsApp Image 2024-09-18 at 19.27.28_6a4111d4.jpg (203.54 KiB) Viewed 4277 times
also the new taillights didn't trigger any faults in 09
-
ciclo
- Bling Bling Diamond Member
- Posts: 8834
- Joined: Sun Feb 24, 2013 10:20 am
- Drives: 6R'13/G7.5'19
- Location: Earth ♥, Spain.
- Contact:
Re: BCM Max Transporter 2013
They look great, ...and no faults in diagnosis!!
Thanks for sharing.
Thanks for sharing.
-
Shadow109
- Bronze Member
- Posts: 152
- Joined: Sun Aug 16, 2020 2:59 pm
- Drives: Vw t5.1 2013
- Location: Israel
Re: BCM Max Transporter 2013
New mood :-
Start-stop & mood buttons on MFSW
MFSW feed line should be changed from 15.kl to 30.kl (logically)
https://youtu.be/0WOrTZGFDb8?si=InKsANVZBvMbQvfi
Start-stop & mood buttons on MFSW
- IMG_3784.jpeg (1.46 MiB) Viewed 4077 times
https://youtu.be/0WOrTZGFDb8?si=InKsANVZBvMbQvfi
-
Shadow109
- Bronze Member
- Posts: 152
- Joined: Sun Aug 16, 2020 2:59 pm
- Drives: Vw t5.1 2013
- Location: Israel
Re: BCM Max Transporter 2013
Hello all, So it have been a while since I finished retrofitting Kessy, and the only thing that wasn't in place was the ELV, it simply doesn't fit on my T5 steering column, I knew this from the beginning,
In that time I was intending to swap my steering column with the vw up electric steering, my old steering switch won't fit in the wv up steering column, but the ELV was perfect alternative
so I decided to put off the steering retrofit until I finish Kessy retrofit
this time the wire modification was the easy part, the hard part was to place the steering column itself in my T5
nothing was plug and play, I had to swap the coupling from my t5 to the new steering column, also the steering holder,
the steering column should be placed in the same angle was the old one,
unfortunately I didnt remember to take a pic after I have done the modification to the steering wheel, maybe later I will add them
this was the final result after 3 modifications
the second big issue and question, will the electric steering work with the power steering together, or do I have to figger out a way to disconnect the power steering
as I tried to do basic settings the electric steering started to work for a 10 seconds, but after that it stops and I had A new fualt (crash fault)
in the beginig I suspected that the electric steering was faulty, so I must try another one before I do anything..
after trying another steering I had the same faults, so my last hope was to disconnect the power steering belt (temporarily) and try to do basic settings..
the Suprise was that it did work finally, every thing it ok, even after returning the power belt, the electric steering still works,
I still have one fault that appeared after basic setting that I have to figger out how to solve it
Next step it to connect A5 and try to activate lane assist and sign assist, I know it won't be easy..
my A5 is alredy in place, I had to replace my windshield a couple months ago, so I took the chance and made my magic
I have a new toy that I was putting on the shelf long time ago, I feel its a perfect time to install it :
I have tried it before, but it seems not happy with my pq acc buttons, According to Egor, it likes MQB ACC buttons..
thats all for today
In that time I was intending to swap my steering column with the vw up electric steering, my old steering switch won't fit in the wv up steering column, but the ELV was perfect alternative
so I decided to put off the steering retrofit until I finish Kessy retrofit
this time the wire modification was the easy part, the hard part was to place the steering column itself in my T5
- WhatsApp Image 2024-10-20 at 18.57.26_5334211d.jpg (232.92 KiB) Viewed 3848 times
- WhatsApp Image 2024-10-20 at 18.57.26_8ca676fa.jpg (434.81 KiB) Viewed 3848 times
- WhatsApp Image 2024-10-20 at 18.57.26_a220dd50.jpg (456.39 KiB) Viewed 3848 times
nothing was plug and play, I had to swap the coupling from my t5 to the new steering column, also the steering holder,
the steering column should be placed in the same angle was the old one,
unfortunately I didnt remember to take a pic after I have done the modification to the steering wheel, maybe later I will add them
- WhatsApp Image 2024-10-20 at 19.06.36_01508ce5.jpg (279.99 KiB) Viewed 3848 times
the second big issue and question, will the electric steering work with the power steering together, or do I have to figger out a way to disconnect the power steering
as I tried to do basic settings the electric steering started to work for a 10 seconds, but after that it stops and I had A new fualt (crash fault)
Code: Select all
Address 44: Steering Assist (J792) Labels:| 2Qx-909-144-V2.clb
Part No SW: 2Q1 909 144 T HW: 2Q1 909 144 F
Component: TRW_G4L_MQBA0 611 6213
Serial number: 01213118CP3K155
Coding: 000000000000000000000201010001010000010001
ASAM Dataset: EV_SteerAssisZFGen1PQ12PA 002002
ROD: EV_SteerAssisZFGen1PQ12PA.rod
VCID: C3D8A21BCB10C8C2829-8096
5 Faults Found:
10531840 - Steering angle sensor
B1168 54 [10001001] - Missing Calibration / Basic Setting
MIL ON - Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Priority: 4
Fault Frequency: 1
Reset counter: 106
Mileage: 346576 km
Date: 2024.10.05.
Time: 23:49:32
Engine RPM: 2367 /min
Vehicle speed: 31 km/h
System status: Malfunction
Terminal 15 status: On
Voltage terminal 30: 13.86 V
Power steering current consumption: 0.5 A
max.value: 63.3 A
End stage temperature: 31 C
Steering assistance: engine output: 100 %
Engine angle: 65535
Electric motor speed: 45535 /min
Steering assistance: target engine torque: 0.0 Nm
Steering torque: -1.6 Nm
15793152 - Crash Shut-Down Activated
P1609 00 [10001001] - -
[DEM_FRONT_CRASH_STEERING_RANGE_FAULT]
MIL ON - Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Priority: 4
Fault Frequency: 1
Mileage: 346576 km
Date: 2024.10.05.
Time: 23:47:20
Engine RPM: 863 /min
Vehicle speed: 0 km/h
System status: Malfunction
Terminal 15 status: On
Voltage terminal 30: 13.86 V
Power steering current consumption: 0.5 A
max.value: 63.3 A
End stage temperature: 31 C
Steering assistance: engine output: 100 %
Engine angle: 65535
Electric motor speed: 45535 /min
Steering assistance: target engine torque: 0.0 Nm
Steering torque: 0.0 Nm
10620672 - Databus
U1123 00 [00001001] - Received Error Message
[DEM_CAN_LONG_ACCEL_QBIT_INVALID_FAULT]
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Priority: 6
Fault Frequency: 1
Reset counter: 106
Mileage: 346576 km
Date: 2024.10.05.
Time: 23:47:21
Engine RPM: 856 /min
Vehicle speed: 0 km/h
System status: Malfunction
Terminal 15 status: On
Voltage terminal 30: 13.82 V
Power steering current consumption: 0.5 A
max.value: 63.3 A
End stage temperature: 31 C
Steering assistance: engine output: 100 %
Engine angle: 65535
Electric motor speed: 45535 /min
Steering assistance: target engine torque: 0.0 Nm
Steering torque: 0.0 Nm
10620928 - Databus
U1123 00 [00001001] - Received Error Message
[DEM_CAN_YAW_RATE_QBIT_INVALID_FAULT]
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Priority: 6
Fault Frequency: 1
Reset counter: 106
Mileage: 346576 km
Date: 2024.10.05.
Time: 23:47:21
Engine RPM: 856 /min
Vehicle speed: 0 km/h
System status: Malfunction
Terminal 15 status: On
Voltage terminal 30: 13.82 V
Power steering current consumption: 0.5 A
max.value: 63.3 A
End stage temperature: 31 C
Steering assistance: engine output: 100 %
Engine angle: 65535
Electric motor speed: 45535 /min
Steering assistance: target engine torque: 0.0 Nm
Steering torque: 0.0 Nm
10512640 - Steering End Stops Not Learned
C10AC F0 [10001001] - Unknown Error Elaboration
[DEM_BOTH_ENDSTOP_NOT_KNOWN]
MIL ON - Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Priority: 4
Fault Frequency: 1
Reset counter: 106
Mileage: 346576 km
Date: 2024.10.05.
Time: 23:47:20
Engine RPM: 863 /min
Vehicle speed: 0 km/h
System status: Malfunction
Terminal 15 status: On
Voltage terminal 30: 13.86 V
Power steering current consumption: 0.5 A
max.value: 63.3 A
End stage temperature: 31 C
Steering assistance: engine output: 100 %
Engine angle: 65535
Electric motor speed: 45535 /min
Steering assistance: target engine torque: 0.0 Nm
Steering torque: 0.0 Nm
after trying another steering I had the same faults, so my last hope was to disconnect the power steering belt (temporarily) and try to do basic settings..
the Suprise was that it did work finally, every thing it ok, even after returning the power belt, the electric steering still works,
I still have one fault that appeared after basic setting that I have to figger out how to solve it
Code: Select all
Saturday,19,October,2024,17:37:00:22797
VCDS -- Windows Based VAG/VAS Emulator Running on Windows 11 x64
VCDS Version: 24.7.1.0 (x64) HEX-NET2 CB: 0.4643.5
Data version: 20240919 DS356.3
www.Ross-Tech.com
VIN: WV1ZZZ7HZDH036544 License Plate:
Chassis Type: 7H-VN75 (7E0)
Scan: 01 03 04 05 08 09 10 13 14 15 17 19 20 25 2B 3C 44 47 55 5F
61 65 6C 0B
VIN: WV1ZZZ7HZDH036544 Mileage: 348440km-216510miles
01-Engine -- Status: Malfunction 0010
03-ABS Brakes -- Status: OK 0000
04-Steering Angle -- Status: OK 0000
05-Acc/Start Auth. -- Status: OK 0000
08-Auto HVAC -- Status: OK 0000
09-Cent. Elect. -- Status: OK 0000
10-Park/Steer Assist -- Status: Malfunction 0010
13-Auto Dist. Reg -- Status: OK 0000
14-Susp. Elect. -- Status: Malfunction 0010
15-Airbags -- Status: OK 0000
17-Instruments -- Status: OK 0000
19-CAN Gateway -- Status: OK 0000
20-High Beam Assist. -- Status: OK 0000
25-Immobilizer -- Status: OK 0000
2B-Steer. Col. Lock -- Status: OK 0000
3C-Lane Change -- Status: OK 0000
44-Steering Assist -- Status: Malfunction 0010
47-Sound System -- Status: OK 0000
55-Headlight Range -- Status: OK 0000
5F-Information Electr. -- Status: Malfunction 0010
61-Battery Regul. -- Status: OK 0000
65-Tire Pressure -- Status: OK 0000
6C-Back-up Cam. -- Status: OK 0000
-------------------------------------------------------------------------------
Address 01: Engine (J623-CAAC) Labels:. 03L-906-022-CAA.clb
Part No SW: 03L 906 019 GQ HW: 03L 907 309 L
Component: R4 2.0l TDI H34 9977
Revision: 22H34--- Serial number: 00000000000000 CVN: 714DC616
Coding: 01114012234401080000
Shop #: WSC 43690 085 12345
ASAM Dataset: EV_ECM20TDI01103L906019GQ 004006
ROD: EV_ECM20TDI01103L906019FH_003.rod
VCID: 80526D179A8613DADFB-80D4
VINID: 9E606AAAA1D8A946000C6144105E5FB8A3
2 Faults Found:
16703 - Gear Reconition Sensor
P181C 00 [00100111] - Implausbile Signal
Not Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Priority: 2
Fault Frequency: 1
Mileage: 348443 km
Date: 2024.10.19.
Time: 06:01:28
Engine RPM: 830.50 /min
Normed load value: 30.2 %
Vehicle speed: 0 km/h
Coolant temperature: 81 C
Intake air temperature: 43 C
Ambient air pressure: 920 mbar
Voltage terminal 30: 11.960 V
Unlearning counter according OBD: 40
Neutral position sensor: current transmission angle: 20.00
Neutral position sensor: adapted transmission angle: 0.00
Adaptation status of neutral position sensor-Bits 0-7: 4
Transmission neutral position sensor voltage: 0 mV
Neutral position sensor: upper adaptation value: 0 mV
Neutral position sensor: lower adaptation value: 0 mV
10092 - Neutral Gear Sensor
P15A0 00 [00100111] - Electrical Malfunction
Not Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Priority: 2
Fault Frequency: 1
Mileage: 348443 km
Date: 2024.10.19.
Time: 06:01:29
Engine RPM: 891.00 /min
Normed load value: 10.6 %
Vehicle speed: 0 km/h
Coolant temperature: 81 C
Intake air temperature: 43 C
Ambient air pressure: 920 mbar
Voltage terminal 30: 11.940 V
Unlearning counter according OBD: 40
Neutral position sensor: current transmission angle: 20.00
Neutral position sensor: adapted transmission angle: 0.00
Adaptation status of neutral position sensor-Bits 0-7: 4
Transmission neutral position sensor voltage: 0 mV
Neutral position sensor: upper adaptation value: 0 mV
Neutral position sensor: lower adaptation value: 0 mV
Readiness: 0 0 0 0 1
-------------------------------------------------------------------------------
Address 03: ABS Brakes (J104) Labels: 7E0-907-37x-MK100ESC.clb
Part No SW: 7E0 907 379 Q HW: 7E0 907 379 N
Component: ESC H06 0133
Revision: 00000000 Serial number: 62787000000113
Coding: 307E4098256586840C7A027AA486612F38F555
Shop #: WSC 02739 790 50316
ASAM Dataset: EV_Brake1ESCCONTIVN75XGP2 011001
ROD: EV_Brake1ESCCONTIVN75XGP2_011.rod
VCID: C0D2AD17DA06D3DA9FB-8094
No fault code found.
-------------------------------------------------------------------------------
Address 05: Acc/Start Auth. (J518) Labels:. 5K0-959-434.clb
Part No SW: 5K0 959 434 H HW: 5K0 959 434
Component: VWKESSYPQ35GP 093 1305
Revision: 00093000 Serial number: 0467921560
Coding: 032C1C
Shop #: WSC 12345 123 12345
ASAM Dataset: EV_KESSYPQ35G A02720
ROD: N/A
VCID: BA26DFFFBCDA890AD1F-80EE
No ASAM data for: "EV_KESSYPQ35G" (VN75)
No fault code found.
-------------------------------------------------------------------------------
Address 08: Auto HVAC (J301) Labels:| 7E5-907-047.clb
Part No SW: 7E5 907 047 AK HW: 7E5 907 047 AK
Component: Climatic-T5 H11 0203
Revision: 00001005
Coding: 0000000002
Shop #: WSC 02737 790 50316
ASAM Dataset: EV_ClimaticT5 A01003
ROD: EV_ClimaT5Basis_VN75.rod
VCID: F8A205F7C2565B1AE7B-80AC
No fault code found.
-------------------------------------------------------------------------------
Address 09: Cent. Elect. (J519) Labels:. 7E0-937-BCM-V1.clb
Part No SW: 7E0 937 090 E HW: 7E0 937 090 E
Component: BCM PQ25 Max4 H84 0772
Revision: B9084001 Serial number: 2502 306190145
Coding: 22B03D3E4EFF201281280F817EEB9FDDFF86660F608D79C073E4503F0860
Shop #: WSC 12345 123 61029
VCID: AD0CE4A37D142EB244D-80F8
Subsystem 1 - Part No: 5K7 955 559 B Labels: 5K7-955-559.CLB
Component: RLS 230916 03 37 0059
Coding: 0228EE
Subsystem 2 - Part No SW: 7E0 959 801 HW: 7E0 959 801 Labels: 7E0-959-80X-V1.CLB
Component: J386__TSG_FT 002 3313
Serial number: --------------------
Coding: 000000
Subsystem 3 - Part No SW: 7E0 959 802 HW: 7E0 959 802 Labels: 7E0-959-80X-V1.CLB
Component: J387__TSG_BT 002 3313
Serial number: --------------------
Coding: 000000
Subsystem 4 - Part No: 1K0 951 605 C
Component: LIN BACKUP HO H05 1501
Coding: 000000
Subsystem 5 - Part No SW: 7E0 959 442 A HW: 7E0 959 442 A
Component: E221__MFL-DC1 H02 0103
Serial number: 39180000000570018056
Coding: B4FFFF
No fault code found.
-------------------------------------------------------------------------------
Address 10: Park/Steer Assist (J446) Labels:| 5Q0-919-294.clb
Part No SW: 1K8 919 472 C HW: 5Q0 919 294 A
Component: PARKHILFE 8K H03 0480
Revision: -------- Serial number: 39331817601496
Coding: 0041155041
Shop #: WSC 21890 003 104857
ASAM Dataset: EV_EPHVA18VW364GP00 001007
ROD: EV_EPHVA18VW364GP00_VW32.rod
VCID: B720C6CB8FC894622E1-80E2
1 Fault Found:
12718592 - Databus
U1121 00 [00001001] - Missing Message
[Steuerger t f r Lenks ulenelektronik-J527/BCM - mZAS_1 - kein Signal/keine Kommunikation]
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Priority: 6
Fault Frequency: 1
Reset counter: 148
Mileage: 348443 km
Date: 2024.10.19.
Time: 06:01:24
-------------------------------------------------------------------------------
Address 13: Auto Dist. Reg (J428) Labels:| 7N0-907-572.clb
Part No SW: 7N0 907 572 C HW: 7E0 907 572
Component: ACC Bosch PQx H03 0211
Serial number: 1909180453A6EF Dataset Number: ACC_MRRevo1 0001
Coding: 00004000FE0779
Shop #: WSC 01383 790 50316
ASAM Dataset: EV_ACCBEGVW361 001006
ROD: EV_ACCBEGVW361.rod
VCID: B63ECBCF88C26D6A357-80E2
No fault code found.
-------------------------------------------------------------------------------
Address 14: Susp. Elect. (J250) Labels:. 3C0-907-376.clb
Part No SW: 3C0 907 376 A HW: 3C0 907 376
Component: DAEMPFUNGS-SG H07 0071
Revision: 00000000 Serial number: 12030906320002
Coding: 030180
Shop #: WSC 00046 000 00000
VCID: A700168B5FE804E2BE1-80F2
2 Faults Found:
03262 - Comfort Restriction
000 - -
Freeze Frame:
Fault Status: 01100000
Fault Priority: 6
Fault Frequency: 1
Reset counter: 148
Mileage: 348443 km
Time Indication: 0
Date: 2024.10.19.
Time: 06:01:22
Freeze Frame:
Error Code: 2
Bin. Bits: 00000000
01769 - Sensor for Vehicle Leveling; Front Right (G289)
010 - Open or Short to Plus
Freeze Frame:
Fault Status: 01101010
Fault Priority: 2
Fault Frequency: 1
Reset counter: 148
Mileage: 348443 km
Time Indication: 0
Date: 2024.10.19.
Time: 06:01:22
Freeze Frame:
-------------------------------------------------------------------------------
Address 15: Airbags (J234) Labels:| 5K0-959-655.clb
Part No SW: 7E0 959 655 D HW: 7E0 959 655 D
Component: VW10Airbag00G 008 0016
Revision: -------- Serial number: 003PH0013MB$ Dataset Number: 7E0003V____ 0735
Coding: 000000000000000000000000000000003047
Shop #: WSC 02734 790 50316
ASAM Dataset: EV_AirbaVW10BPAVW12X 001028
ROD: EV_AirbaVW10BPAVN750.rod
VCID: B720C6CB8FC894622E1-80E2
No fault code found.
-------------------------------------------------------------------------------
Address 17: Instruments (J285) Labels:| 5K0-920-xxx-17.clb-SRI1
Part No SW: 7E0 920 980 S HW: 7E0 920 980 S
Component: KOMBI H04 1109
Serial number: 00000000000000
Coding: 140E230B00
Shop #: WSC 02737 790 50316
ASAM Dataset: EV_Kombi_UDS_VDD_RM09 A05733
ROD: EV_Kombi_UDS_VDD_RM09_005_VW25.rod
VCID: BB28DAFBB3E0B002CA9-80EE
No fault code found.
-------------------------------------------------------------------------------
Address 19: CAN Gateway (J533) Labels:. 7E0-909-901.clb
Part No SW: 7E0 909 901 HW: 7E0 937 090 E
Component: GW-K-CAN TP20 H84 0772
Revision: B9084001
Coding: 04220F
Shop #: WSC 12345 123 61029
VCID: E88255B79276CB9A77B-80BC
No fault code found.
-------------------------------------------------------------------------------
Address 20: High Beam Assist. (J844) Labels:| 8S0-857-511.clb
Part No SW: 7E0 857 511 G HW: 7E0 857 511 E
Component: FLA H10 0003
Revision: AA001001
Coding: 010100E200000100000000
Shop #: WSC 12345 123 12345
ASAM Dataset: EV_HighBeamAssisAU316 001004
ROD: EV_HighBeamAssisAU316_VW32.rod
VCID: AE0EE3AF709255AA7D7-80FA
No fault code found.
-------------------------------------------------------------------------------
Address 25: Immobilizer (J334) Labels:| 5K0-920-xxx-25.clb
Part No SW: 5K0 953 234 HW: 5K0 953 234
Component: IMMO H04 1109
Serial number:
Coding: 000007
Shop #: WSC 12345 123 12345
ASAM Dataset: EV_Immo_UDS_VDD_RM09 A03710
ROD: EV_Immo_UDS_VDD_RM09_VW23.rod
VCID: EA862FBF8CFAF98A61F-80BE
No fault code found.
-------------------------------------------------------------------------------
Address 2B: Steer. Col. Lock (J764) Labels:* 5K0-905-861.clb
Part No SW: 5K0 905 861 C HW: 5K0 905 861 C
Component: ELV-PQ35 H21 0240
Revision: 00000000 Serial number: 14000305204001
Coding: 4100000000000000
Shop #: WSC 00066 790 50316
ASAM Dataset: EV_ELVMarquMPVW36X A01001
ROD: EV_ELVMarquMPVW36X_VW32.rod
VCID: B032FDD76AA6435A6FB-80E4
No fault code found.
-------------------------------------------------------------------------------
Address 3C: Lane Change (J1086) Labels: Redir Fail!
Part No SW: 2Q0 907 686 B HW: 2Q0 907 686 B
Component: HRE3_Kl15_Mst H06 0150
Serial number: 14520003983159 Dataset Number: V03935303MB 0001
Coding: 529524A0
ASAM Dataset: EV_HREntryHellaGen3Kl15 002001
ROD: N/A
VCID: B924C0F3B9DC8212D85-80EC
Subsystem 1 - Part No SW: 2Q0 907 685 B HW: 2Q0 907 685 B
Component: HRE3_Kl15_Slv H06 0150
Serial number: 14520003959660
No ASAM data for: "EV_HREntryHellaGen3Kl15" (VN75)
No fault code found.
-------------------------------------------------------------------------------
Address 44: Steering Assist (J792) Labels:| 2Qx-909-144-V2.clb
Part No SW: 2Q1 909 144 T HW: 2Q1 909 144 F
Component: TRW_G4L_MQBA0 611 6213
Serial number: 01478032CP3L073
Coding: 000000000100000000000200010001000000010001
ASAM Dataset: EV_SteerAssisZFGen1PQ12PA 002002
ROD: EV_SteerAssisZFGen1PQ12PA.rod
VCID: C3D8A21BCB10C8C2829-8096
1 Fault Found:
10530304 - Databus
U1121 00 [00001001] - Missing Message
[DEM_HCA_MSG_ABSENT_FAULT]
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Priority: 6
Fault Frequency: 1
Reset counter: 148
Mileage: 348443 km
Date: 2024.10.19.
Time: 06:01:25
Engine RPM: 855 /min
Vehicle speed: 0 km/h
System status: Driving mode
Terminal 15 status: On
Voltage terminal 30: 12.08 V
Power steering current consumption: 0.5 A
max.value: 29.7 A
End stage temperature: 38 C
Steering assistance: engine output: 100 %
Engine angle: 132
Electric motor speed: 0 /min
Steering assistance: target engine torque: 0.0 Nm
Steering torque: 0.0 Nm
-------------------------------------------------------------------------------
Address 47: Sound System (R184) Labels: 5K0-035-456.clb
Part No SW: 3AA 035 466 HW: 3AA 035 466
Component: KonzernAmp12K H03 6904
Revision: -------- Serial number: A1108A00007925 Dataset Number: 360050v____ 0004
ASAM Dataset: EV_AudioVerst12KanalSTT1 001001
ROD: EV_AudioVerst12KanalSTT1_VW36.rod
VCID: ED8C24A3BD14EEB204D-80B8
No fault code found.
-------------------------------------------------------------------------------
Address 55: Headlight Range (J431) Labels:. 6R0-907-357.clb
Part No SW: 6R0 907 357 C HW: 6R0 907 357 B
Component: AFS-ECU 005 0050
Revision: -------- Serial number: -------------- Dataset Number: V03600097E0 0001
Coding: 0FC6020001000000
Shop #: WSC 02748 790 50316
ASAM Dataset: EV_HeadlRegulVWLWRCC 002006
ROD: EV_HeadlRegulVWLWRCC.rod
VCID: BA26DFFFBCDA890AD1F-80EE
No fault code found.
-------------------------------------------------------------------------------
Address 5F: Information Electr. (J794) Labels:| 5G0-035-MIB-STD2.clb
Part No SW: 5C0 035 680 G HW: 5C0 035 680 G
Component: MU-S-ND-ER H41 0480
Serial number: VWZAZ2U1668085 Dataset Number: V00000000VW 0001
Coding: 0645000FBE00000011110006010D08001F0103C401200100CE
Shop #: WSC 00046 123 12345
ASAM Dataset: EV_MUStd4CTSAT 001022
ROD: EV_MUStd4CTSAT_VW32.rod
VCID: A51C1C83256416F28CD-80F0
Data carrier:
Subsystem 1 - Part No SW: V03 959 820 DC HW: -----------
Component: MRM DL2 23/24 --- 2010
Serial number: --------------------
2 Faults Found:
1555 - Check Software Version Management
B201A 00 [00001001] - -
[Check software version management]
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Priority: 6
Fault Frequency: 1
Reset counter: 148
Mileage: 348443 km
Date: 2024.10.19.
Time: 06:01:24
Voltage terminal 30: 12.0 V
Status_Software_Version_Management-module_name:
15360768 - Component Protection
U1101 00 [00001001] - Active
[Anti-theft protection - component protection active (0xEA6300)]
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Priority: 4
Fault Frequency: 1
Reset counter: 148
Mileage: 348443 km
Date: 2024.10.19.
Time: 06:01:24
Voltage terminal 30: 12.0 V
-------------------------------------------------------------------------------
Address 61: Battery Regul. (J840) Labels:. 1K0-907-534.clb
Part No SW: 7E0 907 534 HW: 7E0 937 090 E
Component: Batt.regelung H84 0772
Serial number: 2502 306190145
Coding: 330B1A73
Shop #: WSC 12345 123 12345
VCID: E88255B79276CB9A77B-80BC
Subsystem 1 - Part No SW: 7E0 915 181 G HW: 7E0 915 181 G
Component: J367-BDM H08 0223
Serial number: 62309D31111261021812
No fault code found.
-------------------------------------------------------------------------------
Address 65: Tire Pressure (J502) Labels: 3AA-907-273.clb
Part No SW: 3AA 907 273 F HW: 5Q0 907 273
Component: RDKBERU30 H04 0011
Serial number: 30000000047437
ASAM Dataset: EV_RDKBERU30 005005
ROD: EV_RDKBERU30_005.rod
VCID: B720C6CB8FC894622E1-80E2
No fault code found.
-------------------------------------------------------------------------------
Address 6C: Back-up Cam. (J772) Labels:| 5Q0-980-556.clb
Part No SW: 5Q0 980 556 B HW: 5Q0 980 556 B
Component: RVC Compact H18 0231
Dataset Number: V03935257YE 0001
Coding: 047300010600041F000040
Shop #: WSC 12345 123 12345
ASAM Dataset: EV_CamSysRVRVCPANAMQBAB 006009
ROD: EV_CamSysRVRVCPANAMQBAB_006_VW37.rod
VCID: B924C0F3B9DC8212D85-80EC
1 Fault Found:
10489856 - No Basic Setting
B2010 00 [00001001] - -
[RearView system not calibrated]
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Priority: 5
Fault Frequency: 1
Reset counter: 250
Mileage: 150182 km
Date: 2024.01.14
Time: 14:07:40
passive
End----(Elapsed Time: 02:29, VBatt start/end: 12.0V/11.9V. VIgn 12.0V)-----
Next step it to connect A5 and try to activate lane assist and sign assist, I know it won't be easy..
my A5 is alredy in place, I had to replace my windshield a couple months ago, so I took the chance and made my magic
I have a new toy that I was putting on the shelf long time ago, I feel its a perfect time to install it :
- WhatsApp Image 2024-10-20 at 19.34.08_669f481e.jpg (255.89 KiB) Viewed 3848 times
thats all for today
-
Shadow109
- Bronze Member
- Posts: 152
- Joined: Sun Aug 16, 2020 2:59 pm
- Drives: Vw t5.1 2013
- Location: Israel
Re: BCM Max Transporter 2013
the fault in 44 just simply disappeared 
I have connected A5
next step :
1) basic settings for A5
2) replacing 7E0 BCM with 1S0,coding, readding the keys, and replacing MFSW buttons
I have connected A5
next step :
1) basic settings for A5
2) replacing 7E0 BCM with 1S0,coding, readding the keys, and replacing MFSW buttons
Code: Select all
Tuesday,22,October,2024,21:26:49:22797
VCDS -- Windows Based VAG/VAS Emulator Running on Windows 11 x64
VCDS Version: 24.7.1.0 (x64) HEX-NET2 CB: 0.4643.5
Data version: 20240919 DS356.3
www.Ross-Tech.com
VIN: WV1ZZZ7HZDH036544 License Plate:
Chassis Type: 7H-VN75 (7E0)
Scan: 01 03 04 05 08 09 10 13 14 15 17 19 20 25 2B 3C 44 47 55 5F
61 65 6C A5 0B
VIN: WV1ZZZ7HZDH036544 Mileage: 348870km-216777miles
01-Engine -- Status: Malfunction 0010
03-ABS Brakes -- Status: OK 0000
04-Steering Angle -- Status: OK 0000
05-Acc/Start Auth. -- Status: OK 0000
08-Auto HVAC -- Status: OK 0000
09-Cent. Elect. -- Status: OK 0000
10-Park/Steer Assist -- Status: Malfunction 0010
13-Auto Dist. Reg -- Status: OK 0000
14-Susp. Elect. -- Status: OK 0000
15-Airbags -- Status: OK 0000
17-Instruments -- Status: OK 0000
19-CAN Gateway -- Status: OK 0000
20-High Beam Assist. -- Status: OK 0000
25-Immobilizer -- Status: OK 0000
2B-Steer. Col. Lock -- Status: OK 0000
3C-Lane Change -- Status: OK 0000
44-Steering Assist -- Status: OK 0000
47-Sound System -- Status: OK 0000
55-Headlight Range -- Status: OK 0000
5F-Information Electr. -- Status: Malfunction 0010
61-Battery Regul. -- Status: OK 0000
65-Tire Pressure -- Status: OK 0000
6C-Back-up Cam. -- Status: OK 0000
A5-Frt Sens. Drv. Assist -- Status: Malfunction 0010
-------------------------------------------------------------------------------
Address 01: Engine (J623-CAAC) Labels:. 03L-906-022-CAA.clb
Part No SW: 03L 906 019 GQ HW: 03L 907 309 L
Component: R4 2.0l TDI H34 9977
Revision: 22H34--- Serial number: 00000000000000 CVN: 714DC616
Coding: 01114012234401080000
Shop #: WSC 43690 085 12345
ASAM Dataset: EV_ECM20TDI01103L906019GQ 004006
ROD: EV_ECM20TDI01103L906019FH_003.rod
VCID: 80526D179A8613DADFB-80D4
VINID: 9E606AAAA1D8A946000C6144105E5FB8A3
2 Faults Found:
16703 - Gear Reconition Sensor
P181C 00 [00100111] - Implausbile Signal
Not Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Priority: 2
Fault Frequency: 1
Mileage: 348871 km
Date: 2024.10.22.
Time: 11:48:26
Engine RPM: 857.00 /min
Normed load value: 15.3 %
Vehicle speed: 0 km/h
Coolant temperature: 87 C
Intake air temperature: 45 C
Ambient air pressure: 920 mbar
Voltage terminal 30: 12.940 V
Unlearning counter according OBD: 40
Neutral position sensor: current transmission angle: 20.00
Neutral position sensor: adapted transmission angle: 0.00
Adaptation status of neutral position sensor-Bits 0-7: 4
Transmission neutral position sensor voltage: 0 mV
Neutral position sensor: upper adaptation value: 0 mV
Neutral position sensor: lower adaptation value: 0 mV
10092 - Neutral Gear Sensor
P15A0 00 [00100111] - Electrical Malfunction
Not Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Priority: 2
Fault Frequency: 1
Mileage: 348871 km
Date: 2024.10.22.
Time: 11:48:26
Engine RPM: 865.50 /min
Normed load value: 14.5 %
Vehicle speed: 0 km/h
Coolant temperature: 87 C
Intake air temperature: 45 C
Ambient air pressure: 920 mbar
Voltage terminal 30: 12.980 V
Unlearning counter according OBD: 40
Neutral position sensor: current transmission angle: 20.00
Neutral position sensor: adapted transmission angle: 0.00
Adaptation status of neutral position sensor-Bits 0-7: 4
Transmission neutral position sensor voltage: 0 mV
Neutral position sensor: upper adaptation value: 0 mV
Neutral position sensor: lower adaptation value: 0 mV
Readiness: 0 0 0 0 0
-------------------------------------------------------------------------------
Address 03: ABS Brakes (J104) Labels: 7E0-907-37x-MK100ESC.clb
Part No SW: 7E0 907 379 Q HW: 7E0 907 379 N
Component: ESC H06 0133
Revision: 00000000 Serial number: 62787000000113
Coding: 307E4098256586840C7A027AA486612F38F555
Shop #: WSC 02739 790 50316
ASAM Dataset: EV_Brake1ESCCONTIVN75XGP2 011001
ROD: EV_Brake1ESCCONTIVN75XGP2_011.rod
VCID: C0D2AD17DA06D3DA9FB-8094
No fault code found.
-------------------------------------------------------------------------------
Address 05: Acc/Start Auth. (J518) Labels:. 5K0-959-434.clb
Part No SW: 5K0 959 434 H HW: 5K0 959 434
Component: VWKESSYPQ35GP 093 1305
Revision: 00093000 Serial number: 0467921560
Coding: 032C1C
Shop #: WSC 12345 123 12345
ASAM Dataset: EV_KESSYPQ35G A02720
ROD: N/A
VCID: BA26DFFFBCDA890AD1F-80EE
No ASAM data for: "EV_KESSYPQ35G" (VN75)
No fault code found.
-------------------------------------------------------------------------------
Address 08: Auto HVAC (J301) Labels:| 7E5-907-047.clb
Part No SW: 7E5 907 047 AK HW: 7E5 907 047 AK
Component: Climatic-T5 H11 0203
Revision: 00001005
Coding: 0000000002
Shop #: WSC 02737 790 50316
ASAM Dataset: EV_ClimaticT5 A01003
ROD: EV_ClimaT5Basis_VN75.rod
VCID: F8A205F7C2565B1AE7B-80AC
No fault code found.
-------------------------------------------------------------------------------
Address 09: Cent. Elect. (J519) Labels:. 7E0-937-BCM-V1.clb
Part No SW: 7E0 937 090 E HW: 7E0 937 090 E
Component: BCM PQ25 Max4 H84 0772
Revision: B9084001 Serial number: 2502 306190145
Coding: 22B03D3E4EFF201281280F817EEB9FDDFF86660F608D79C073E4503F0860
Shop #: WSC 12345 123 61029
VCID: AD0CE4A37D142EB244D-80F8
Subsystem 1 - Part No: 5K7 955 559 B Labels: 5K7-955-559.CLB
Component: RLS 230916 03 37 0059
Coding: 0228EE
Subsystem 2 - Part No SW: 7E0 959 801 HW: 7E0 959 801 Labels: 7E0-959-80X-V1.CLB
Component: J386__TSG_FT 002 3313
Serial number: --------------------
Coding: 000000
Subsystem 3 - Part No SW: 7E0 959 802 HW: 7E0 959 802 Labels: 7E0-959-80X-V1.CLB
Component: J387__TSG_BT 002 3313
Serial number: --------------------
Coding: 000000
Subsystem 4 - Part No: 1K0 951 605 C
Component: LIN BACKUP HO H05 1501
Coding: 000000
Subsystem 5 - Part No SW: 7E0 959 442 A HW: 7E0 959 442 A
Component: E221__MFL-DC1 H02 0103
Serial number: 39180000000570018056
Coding: B4FFFF
No fault code found.
-------------------------------------------------------------------------------
Address 10: Park/Steer Assist (J446) Labels:| 5Q0-919-294.clb
Part No SW: 1K8 919 472 C HW: 5Q0 919 294 A
Component: PARKHILFE 8K H03 0480
Revision: -------- Serial number: 39331817601496
Coding: 0041155041
Shop #: WSC 21890 003 104857
ASAM Dataset: EV_EPHVA18VW364GP00 001007
ROD: EV_EPHVA18VW364GP00_VW32.rod
VCID: B720C6CB8FC894622E1-80E2
1 Fault Found:
12718592 - Databus
U1121 00 [00001001] - Missing Message
[Steuerger t f r Lenks ulenelektronik-J527/BCM - mZAS_1 - kein Signal/keine Kommunikation]
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Priority: 6
Fault Frequency: 1
Reset counter: 155
Mileage: 348871 km
Date: 2024.10.22.
Time: 11:48:24
-------------------------------------------------------------------------------
Address 13: Auto Dist. Reg (J428) Labels:| 7N0-907-572.clb
Part No SW: 7N0 907 572 C HW: 7E0 907 572
Component: ACC Bosch PQx H03 0211
Serial number: 1909180453A6EF Dataset Number: ACC_MRRevo1 0001
Coding: 00004000FE0779
Shop #: WSC 01383 790 50316
ASAM Dataset: EV_ACCBEGVW361 001006
ROD: EV_ACCBEGVW361.rod
VCID: B63ECBCF88C26D6A357-80E2
No fault code found.
-------------------------------------------------------------------------------
Address 14: Susp. Elect. (J250) Labels:. 3C0-907-376.clb
Part No SW: 3C0 907 376 A HW: 3C0 907 376
Component: DAEMPFUNGS-SG H07 0071
Revision: 00000000 Serial number: 12030906320002
Coding: 030180
Shop #: WSC 00046 000 00000
VCID: A700168B5FE804E2BE1-80F2
No fault code found.
-------------------------------------------------------------------------------
Address 15: Airbags (J234) Labels:| 5K0-959-655.clb
Part No SW: 7E0 959 655 D HW: 7E0 959 655 D
Component: VW10Airbag00G 008 0016
Revision: -------- Serial number: 003PH0013MB$ Dataset Number: 7E0003V____ 0735
Coding: 000000000000000000000000000000003047
Shop #: WSC 02734 790 50316
ASAM Dataset: EV_AirbaVW10BPAVW12X 001028
ROD: EV_AirbaVW10BPAVN750.rod
VCID: B720C6CB8FC894622E1-80E2
No fault code found.
-------------------------------------------------------------------------------
Address 17: Instruments (J285) Labels:| 5K0-920-xxx-17.clb-SRI1
Part No SW: 7E0 920 980 S HW: 7E0 920 980 S
Component: KOMBI H04 1109
Serial number: 00000000000000
Coding: 140E230B00
Shop #: WSC 02737 790 50316
ASAM Dataset: EV_Kombi_UDS_VDD_RM09 A05733
ROD: EV_Kombi_UDS_VDD_RM09_005_VW25.rod
VCID: BB28DAFBB3E0B002CA9-80EE
No fault code found.
-------------------------------------------------------------------------------
Address 19: CAN Gateway (J533) Labels:. 7E0-909-901.clb
Part No SW: 7E0 909 901 HW: 7E0 937 090 E
Component: GW-K-CAN TP20 H84 0772
Revision: B9084001
Coding: 04220F
Shop #: WSC 12345 123 61029
VCID: E88255B79276CB9A77B-80BC
No fault code found.
-------------------------------------------------------------------------------
Address 20: High Beam Assist. (J844) Labels:| 8S0-857-511.clb
Part No SW: 7E0 857 511 G HW: 7E0 857 511 E
Component: FLA H10 0003
Revision: AA001001
Coding: 010100E200000100000000
Shop #: WSC 12345 123 12345
ASAM Dataset: EV_HighBeamAssisAU316 001004
ROD: EV_HighBeamAssisAU316_VW32.rod
VCID: AE0EE3AF709255AA7D7-80FA
No fault code found.
-------------------------------------------------------------------------------
Address 25: Immobilizer (J334) Labels:| 5K0-920-xxx-25.clb
Part No SW: 5K0 953 234 HW: 5K0 953 234
Component: IMMO H04 1109
Serial number:
Coding: 000007
Shop #: WSC 12345 123 12345
ASAM Dataset: EV_Immo_UDS_VDD_RM09 A03710
ROD: EV_Immo_UDS_VDD_RM09_VW23.rod
VCID: EA862FBF8CFAF98A61F-80BE
No fault code found.
-------------------------------------------------------------------------------
Address 2B: Steer. Col. Lock (J764) Labels:* 5K0-905-861.clb
Part No SW: 5K0 905 861 C HW: 5K0 905 861 C
Component: ELV-PQ35 H21 0240
Revision: 00000000 Serial number: 14000305204001
Coding: 4100000000000000
Shop #: WSC 00066 790 50316
ASAM Dataset: EV_ELVMarquMPVW36X A01001
ROD: EV_ELVMarquMPVW36X_VW32.rod
VCID: B032FDD76AA6435A6FB-80E4
No fault code found.
-------------------------------------------------------------------------------
Address 3C: Lane Change (J1086) Labels: Redir Fail!
Part No SW: 2Q0 907 686 B HW: 2Q0 907 686 B
Component: HRE3_Kl15_Mst H06 0150
Serial number: 14520003983159 Dataset Number: V03935303MB 0001
Coding: 529524A0
ASAM Dataset: EV_HREntryHellaGen3Kl15 002001
ROD: N/A
VCID: B924C0F3B9DC8212D85-80EC
Subsystem 1 - Part No SW: 2Q0 907 685 B HW: 2Q0 907 685 B
Component: HRE3_Kl15_Slv H06 0150
Serial number: 14520003959660
No ASAM data for: "EV_HREntryHellaGen3Kl15" (VN75)
No fault code found.
-------------------------------------------------------------------------------
Address 44: Steering Assist (J792) Labels:| 2Qx-909-144-V2.clb
Part No SW: 2Q1 909 144 T HW: 2Q1 909 144 F
Component: TRW_G4L_MQBA0 611 6213
Serial number: 01478032CP3L073
Coding: 000000000100000000000200010001000000010001
ASAM Dataset: EV_SteerAssisZFGen1PQ12PA 002002
ROD: EV_SteerAssisZFGen1PQ12PA.rod
VCID: C3D8A21BCB10C8C2829-8096
No fault code found.
-------------------------------------------------------------------------------
Address 47: Sound System (R184) Labels: 5K0-035-456.clb
Part No SW: 3AA 035 466 HW: 3AA 035 466
Component: KonzernAmp12K H03 6904
Revision: -------- Serial number: A1108A00007925 Dataset Number: 360050v____ 0004
ASAM Dataset: EV_AudioVerst12KanalSTT1 001001
ROD: EV_AudioVerst12KanalSTT1_VW36.rod
VCID: ED8C24A3BD14EEB204D-80B8
No fault code found.
-------------------------------------------------------------------------------
Address 55: Headlight Range (J431) Labels:. 6R0-907-357.clb
Part No SW: 6R0 907 357 C HW: 6R0 907 357 B
Component: AFS-ECU 005 0050
Revision: -------- Serial number: -------------- Dataset Number: V03600097E0 0001
Coding: 0FC6020001000000
Shop #: WSC 02748 790 50316
ASAM Dataset: EV_HeadlRegulVWLWRCC 002006
ROD: EV_HeadlRegulVWLWRCC.rod
VCID: BA26DFFFBCDA890AD1F-80EE
No fault code found.
-------------------------------------------------------------------------------
Address 5F: Information Electr. (J794) Labels:| 5G0-035-MIB-STD2.clb
Part No SW: 5C0 035 680 G HW: 5C0 035 680 G
Component: MU-S-ND-ER H41 0480
Serial number: VWZAZ2U1668085 Dataset Number: V00000000VW 0001
Coding: 0645000FBE00000011110006010D08001F0103C401200100CE
Shop #: WSC 00046 123 12345
ASAM Dataset: EV_MUStd4CTSAT 001022
ROD: EV_MUStd4CTSAT_VW32.rod
VCID: A51C1C83256416F28CD-80F0
Data carrier:
Subsystem 1 - Part No SW: V03 959 820 DC HW: -----------
Component: MRM DL2 23/24 --- 2010
Serial number: --------------------
2 Faults Found:
1555 - Check Software Version Management
B201A 00 [00001001] - -
[Check software version management]
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Priority: 6
Fault Frequency: 1
Reset counter: 155
Mileage: 348871 km
Date: 2024.10.22.
Time: 11:48:24
Voltage terminal 30: 12.9 V
Status_Software_Version_Management-module_name:
15360768 - Component Protection
U1101 00 [00001001] - Active
[Anti-theft protection - component protection active (0xEA6300)]
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Priority: 4
Fault Frequency: 1
Reset counter: 155
Mileage: 348871 km
Date: 2024.10.22.
Time: 11:48:24
Voltage terminal 30: 13.0 V
-------------------------------------------------------------------------------
Address 61: Battery Regul. (J840) Labels:. 1K0-907-534.clb
Part No SW: 7E0 907 534 HW: 7E0 937 090 E
Component: Batt.regelung H84 0772
Serial number: 2502 306190145
Coding: 330B1A73
Shop #: WSC 12345 123 12345
VCID: E88255B79276CB9A77B-80BC
Subsystem 1 - Part No SW: 7E0 915 181 G HW: 7E0 915 181 G
Component: J367-BDM H08 0223
Serial number: 62309D31111261021812
No fault code found.
-------------------------------------------------------------------------------
Address 65: Tire Pressure (J502) Labels: 3AA-907-273.clb
Part No SW: 3AA 907 273 F HW: 5Q0 907 273
Component: RDKBERU30 H04 0011
Serial number: 30000000047437
ASAM Dataset: EV_RDKBERU30 005005
ROD: EV_RDKBERU30_005.rod
VCID: B720C6CB8FC894622E1-80E2
No fault code found.
-------------------------------------------------------------------------------
Address 6C: Back-up Cam. (J772) Labels:| 5Q0-980-556.clb
Part No SW: 5Q0 980 556 B HW: 5Q0 980 556 B
Component: RVC Compact H18 0231
Dataset Number: V03935257YE 0001
Coding: 047300010600041F000040
Shop #: WSC 12345 123 12345
ASAM Dataset: EV_CamSysRVRVCPANAMQBAB 006009
ROD: EV_CamSysRVRVCPANAMQBAB_006_VW37.rod
VCID: B924C0F3B9DC8212D85-80EC
1 Fault Found:
10489856 - No Basic Setting
B2010 00 [00001001] - -
[RearView system not calibrated]
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Priority: 5
Fault Frequency: 1
Reset counter: 250
Mileage: 150182 km
Date: 2024.01.14
Time: 14:07:40
passive
-------------------------------------------------------------------------------
Address A5: Frt Sens. Drv. Assist (R242) Labels:| 3Q0-980-65X-A5.clb
Part No SW: 3Q0 980 654 P HW: 3Q0 980 654 A
Component: MQB_B_MFK H14 0821
Serial number: 04112012P13717 Dataset Number: V03935308DF 0001
Coding: 01020706020004010002105481D6840084000E01002000
Shop #: WSC 31414 137 00001
ASAM Dataset: EV_MFKBoschMQBB 002041
ROD: EV_MFKBoschMQBB_002.rod
VCID: C4DAA107CE1ECFFABB3-8090
1 Fault Found:
0660 - No Basic Setting
B2010 00 [00001001] - -
[Initial_calibration_missing]
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Priority: 4
Fault Frequency: 1
Reset counter: 155
Mileage: 348871 km
Date: 2024.10.22.
Time: 11:48:24
Control Module temperature: 37 C
Outside temperature: 17.5 C
Vehicle speed: 0.00 km/h
System run time: 3859.0 s
Voltage terminal 15: 13.0 V
mid: 00 1E
Status of camera: operational
Engine_Running_Info: 1
Software_Info_4: 1
Software_Info_3: 2
Software_Info_2: 8
Software_Info_1: 0
End----------(Elapsed Time: 02:09, VBatt start/end: 13.0V/13.0V)-----------
-
til3tsio
- Getting There!
- Posts: 89
- Joined: Thu Feb 11, 2021 10:53 pm
- Drives: Seat Toledo KG
- Location: Greece
Re: BCM Max Transporter 2013
The fault was about lane assist and a missing message from the camera.
Is it really required to change bcm ?
Is it really required to change bcm ?
-
Shadow109
- Bronze Member
- Posts: 152
- Joined: Sun Aug 16, 2020 2:59 pm
- Drives: Vw t5.1 2013
- Location: Israel
Re: BCM Max Transporter 2013
That sounds logical, regarding BCM change, I am not 100% sure its required, but according to Egor, he flashed his bcm to 1S0 but lane assist didn’t work after bsic settings, and there was not faults at all, But after he tried to connect the A5 to power train can-bus, lane assist started to work, but this will cause that the getaway won’t see A5 at alltil3tsio wrote: Tue Oct 22, 2024 8:36 pm The fault was about lane assist and a missing message from the camera.
Is it really required to change bcm ?
This will lead us to a question, what is missing from vw up that we don’t have?
It probably could be a parameter in the can getaway it self, and maybe something in the cluster, but sense the bcm have the getaway in it, and its the responsible for transferring can massages
I would highly suspect it to be the missing part